|
Re: 68 Charger Vacuum Routing. Need pics of yours.
[Re: mymcodebee]
#1953813
11/18/15 06:30 PM
11/18/15 06:30 PM
|
Joined: Mar 2003
Posts: 4,848 Memphis
HemiRick
master
|
master
Joined: Mar 2003
Posts: 4,848
Memphis
|
From the T it goes to the 2 headlight motors. If you're not worried about factory correct yes any T's that fit the hose will work just fine.
Take care, Rick 68 Coronet R/T 440 & 68 Charger 528 Hemi,and 5 Challengers! 6 cyl, 318, 360, 383, 451
|
|
|
Re: 68 Charger Vacuum Routing. Need pics of yours.
[Re: mymcodebee]
#1953922
11/18/15 09:10 PM
11/18/15 09:10 PM
|
Joined: Oct 2011
Posts: 290 Dayton, WA
wesgtx440
enthusiast
|
enthusiast
Joined: Oct 2011
Posts: 290
Dayton, WA
|
There are 2 hoses going into the grille area to open and close the headlight doors. One hose from the headlight switch has a green stripe on it, not both. There are 2 vacuum hose attachments on each of the actuator pods. The hose with the green stripe comes from the switch and tees off to each one of the pods, the other hose from the headlight switch also comes out and tees off to the second vacuum port on the pods. One hose opens the doors, the other closes the doors when you operate the headlight switch. The green stripe hose is specific on which side of the pod it connects to as well. I dont remember which one so hopefully someone else will chime in with that.
68 Charger R/T 440 auto
|
|
|
|
|
|