mopar cylinder heads drawings - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer mopar cylinder heads drawings

Print Thread

mopar cylinder heads drawings #194551 01/15/09 07:11 PM 01/15/09 07:11 PM
Joined: Oct 2005 Posts: 508 mt.ephraim , new jersey jsmopar1072 OP mopar
jsmopar1072 OP mopar Joined: Oct 2005 Posts: 508 mt.ephraim , new jersey	anyone have any mopar 440 cylinder heads drawings especially the exhuast side.ineed a pic with all the dimensions hope fully a chrysler engineered print but doesnt have to be.working on an idea for gaskets.thanks WINNING IS ALL LUCK,ASK ANY LOSER! OBJECTS IN MIRROR APPEAR TO BE LOSING! JEFF'S BUDGET DODGE GARAGE!!!!

Re: mopar cylinder heads drawings [Re: jsmopar1072] #194552 01/15/09 07:17 PM 01/15/09 07:17 PM
Joined: Jan 2003 Posts: 3,575 The Netherlands BigBlockMopar master
BigBlockMopar master Joined: Jan 2003 Posts: 3,575 The Netherlands	Are pics close enough? 516-head, exhaustport; edit: Re-reading your post I see now you want exhaustport spacing measurements and such. My bad. Last edited by BigBlockMopar; 01/15/09 07:19 PM. BigBlockMopar.com

Re: mopar cylinder heads drawings [Re: BigBlockMopar] #194553 01/15/09 07:21 PM 01/15/09 07:21 PM
Joined: Oct 2005 Posts: 508 mt.ephraim , new jersey jsmopar1072 OP mopar
jsmopar1072 OP mopar Joined: Oct 2005 Posts: 508 mt.ephraim , new jersey	i need blue prints of any big block head WINNING IS ALL LUCK,ASK ANY LOSER! OBJECTS IN MIRROR APPEAR TO BE LOSING! JEFF'S BUDGET DODGE GARAGE!!!!

Re: mopar cylinder heads drawings [Re: jsmopar1072] #194554 01/15/09 07:50 PM 01/15/09 07:50 PM
Joined: Jan 2003 Posts: 31,023 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,023 Oregon	Mopar has never released those drawings for some reason. Chevy Performance has blueprints in their books but Mopar doesn't provide us with dimensions. Something I've been complaining about for years. (obviously with little success!)

Re: mopar cylinder heads drawings [Re: AndyF] #194555 01/15/09 08:01 PM 01/15/09 08:01 PM
Joined: Oct 2005 Posts: 508 mt.ephraim , new jersey jsmopar1072 OP mopar
jsmopar1072 OP mopar Joined: Oct 2005 Posts: 508 mt.ephraim , new jersey	some one has had to of made drawings aftermarket heads maybe WINNING IS ALL LUCK,ASK ANY LOSER! OBJECTS IN MIRROR APPEAR TO BE LOSING! JEFF'S BUDGET DODGE GARAGE!!!!

Re: mopar cylinder heads drawings [Re: BigBlockMopar] #194556 01/16/09 12:48 AM 01/16/09 12:48 AM
Joined: Aug 2003 Posts: 4,384 Madison Wi NTOLERANCE master
NTOLERANCE master Joined: Aug 2003 Posts: 4,384 Madison Wi	Quote: Are pics close enough? 516-head, exhaustport; edit: Re-reading your post I see now you want exhaustport spacing measurements and such. My bad. Thanks for posting that pic, I was about to cut a 516 head up. I want to compare it to a 346 head. Got a pic of the intake side? Anyone got a sliced pic of a 452/346/906 head? Sorry to get this thread off track a bit, but heres a for ya. I used to care but....... things have changed

Re: mopar cylinder heads drawings [Re: AndyF] #194557 01/16/09 08:50 AM 01/16/09 08:50 AM
Joined: Jan 2003 Posts: 350 central IL M myduster360 enthusiast
myduster360 enthusiast M Joined: Jan 2003 Posts: 350 central IL	Quote: Mopar has never released those drawings for some reason. Chevy Performance has blueprints in their books but Mopar doesn't provide us with dimensions. Something I've been complaining about for years. (obviously with little success!) jsmopar9766, If all you need drawing for is to mock up gaskets, I'd think with a good set of calipers you could get some decent nominal dimensions. Here at work we have the VALIDATOR ! Its a big contraption the Incoming Inspection uses to varify that parts are to print. If I had a BB head, I'd run one through it for you. Ohnestly though, the tollerances on gaskets are huge, probably +/-.050". You can measure much better than that with a good set of 12" calipers. If you can get me a hand sketch of just HALF the head(Its symetric, split between two center ex ports, so don't waste time measuring the whole thing) I can AutoCAD it for you. Im guessing you need a DXF file for the water-jet guy to cut material. 1972 Swinger 3.6L Pentastar Diablo CMR tuner

Re: mopar cylinder heads drawings [Re: NTOLERANCE] #194558 01/16/09 06:18 PM 01/16/09 06:18 PM
Joined: Jan 2003 Posts: 3,575 The Netherlands BigBlockMopar master
BigBlockMopar master Joined: Jan 2003 Posts: 3,575 The Netherlands	Quote: Thanks for posting that pic, I was about to cut a 516 head up. I want to compare it to a 346 head. Got a pic of the intake side? Well, you're lucky. I had my pocketknife with me today and managed slice the intake port aswell Overview how I made the cuts; BigBlockMopar.com

Re: mopar cylinder heads drawings [Re: BigBlockMopar] #194559 01/16/09 06:28 PM 01/16/09 06:28 PM
Joined: Aug 2003 Posts: 4,384 Madison Wi NTOLERANCE master
NTOLERANCE master Joined: Aug 2003 Posts: 4,384 Madison Wi	Thanks again. I've got a messed up 346 I am going to cut this weekend. Intakes were ported into the water jackets, but the exhausts were untouched. I used to care but....... things have changed

Re: mopar cylinder heads drawings [Re: NTOLERANCE] #194560 01/18/09 10:42 PM 01/18/09 10:42 PM
Joined: Aug 2003 Posts: 4,384 Madison Wi NTOLERANCE master
NTOLERANCE master Joined: Aug 2003 Posts: 4,384 Madison Wi	WEll, I TRIED cutting through the exhaust port on my junk 346 head, and got stopped stone cold at the oem exhaust seat. Anyone who says the oem induction hardened seats are hard, hasnt tried cutting them with a band saw. I used to care but....... things have changed

Re: mopar cylinder heads drawings [Re: NTOLERANCE] #194561 01/20/09 07:17 AM 01/20/09 07:17 AM
Joined: Aug 2003 Posts: 6,301 colorado A a12superbee master
a12superbee master A Joined: Aug 2003 Posts: 6,301 colorado	Interesting side note/thread jack, I was at a show last summer and for the charity dinner auction there was the full engineering blueprint for a 426 hemi head. No joke, it was about 4 feet tall and probably 10 feet long. They didn't take CC's so all I had was the cash in my pockets but another bidder and I ran it up to about 600 before I had to bail. I'd have gone into the thousands if they'd have taken CC's or I'd brought more cash or the check book. Talking to the buyer after he said the same thing, he'd have gone as far as his bank account would allow too. It was awesome. I can't afford this. mark

Re: mopar cylinder heads drawings [Re: a12superbee] #194562 01/20/09 10:42 AM 01/20/09 10:42 AM
Joined: Aug 2004 Posts: 1,047 Arizona 6 68CoronetRT super stock
68CoronetRT super stock 6 Joined: Aug 2004 Posts: 1,047 Arizona	Quote: Interesting side note/thread jack, I was at a show last summer and for the charity dinner auction there was the full engineering blueprint for a 426 hemi head. No joke, it was about 4 feet tall and probably 10 feet long. They didn't take CC's so all I had was the cash in my pockets but another bidder and I ran it up to about 600 before I had to bail. I'd have gone into the thousands if they'd have taken CC's or I'd brought more cash or the check book. Talking to the buyer after he said the same thing, he'd have gone as far as his bank account would allow too. It was awesome. You should have offered to buy 50% interest in it and then gotten a copy made.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1