|
Re: Pics needed to custom valve cover breathers
[Re: 340_Dart]
#1944936
11/04/15 11:44 AM
11/04/15 11:44 AM
|
Joined: Dec 2007
Posts: 12,587 Great Neck,LI,new york
hemi-itis
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 12,587
Great Neck,LI,new york
|
I went with the bolt on Moroso breather than seconds as an oil fill.2 breathers and 2 Moroso puke tanks.
HEMI-ITIS has no cure. My condition is fully BLOWN!!
|
|
|
Re: Pics needed to custom valve cover breathers
[Re: 340_Dart]
#1944990
11/04/15 01:35 PM
11/04/15 01:35 PM
|
Joined: Jan 2003
Posts: 10,022 MN
JERICOGTX
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,022
MN
|
Thank you for posting the pictures of the Moroso breathers. I've been looking at those, but just wasn't sure about them. I'll be ordering a set for the new car.
Jeff
69 GTX
68 Road Runner
|
|
|
Re: Pics needed to custom valve cover breathers
[Re: JERICOGTX]
#1944997
11/04/15 01:54 PM
11/04/15 01:54 PM
|
Joined: Feb 2005
Posts: 20,173 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,173
PA.
|
Make sure you put both breathers towards the front and install nice baffles or you make end up installing a catch can like I just had to do
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: Pics needed to custom valve cover breathers
[Re: 340_Dart]
#1945206
11/04/15 08:08 PM
11/04/15 08:08 PM
|
Joined: Feb 2011
Posts: 4,302 Nebraska
72Swinger
master
|
master
Joined: Feb 2011
Posts: 4,302
Nebraska
|
MUST put baffling in valve covers under breather hole before they go to anything else, whether its a breather tank/catch can etc. The vapors need to get out but the oil needs to stay.
Mopar to the bone!!!
|
|
|
Re: Pics needed to custom valve cover breathers
[Re: 72Swinger]
#1945254
11/04/15 09:37 PM
11/04/15 09:37 PM
|
Joined: Jan 2005
Posts: 2,540 Milwaukee WI
TRENDZ
master
|
master
Joined: Jan 2005
Posts: 2,540
Milwaukee WI
|
Forward location, large tube size. These tubes go very high into the filters that you see. This was on my worn out boosted engine. No problems with oil drips or leakage. Keep the splash gaurds inside the valve covers as far from the tube opening as possible. The more free flowing large area the better. Baffling that restricts air flow creates velocity... velocity pics up oil.
"use it 'till it breaks, replace as needed"
|
|
|
|
|
|