|
Re: Do they make a 9.25 c clip eliminator
[Re: moparborn]
#1941923
10/31/15 12:55 AM
10/31/15 12:55 AM
|
Joined: May 2006
Posts: 1,260 New Mexico
Adobedude
pro stock
|
pro stock
Joined: May 2006
Posts: 1,260
New Mexico
|
I'm surprised no one makes a c clip eliminator for a 9.25, I'm looking for other ways to retain the axles without ditching the 9.25 as I'm creeping up on running 10s
2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.
|
|
|
Re: Do they make a 9.25 c clip eliminator
[Re: moparborn]
#1941993
10/31/15 04:25 AM
10/31/15 04:25 AM
|
Joined: Jan 2003
Posts: 20,182 Park Forest, IL
slantzilla
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 20,182
Park Forest, IL
|
Look for Crizila in the Race section. I think he may have gotten Moser to build him some.
"Everybody funny, now you funny too."
|
|
|
Re: Do they make a 9.25 c clip eliminator
[Re: Stanton]
#1942189
10/31/15 02:05 PM
10/31/15 02:05 PM
|
Joined: May 2006
Posts: 1,260 New Mexico
Adobedude
pro stock
|
pro stock
Joined: May 2006
Posts: 1,260
New Mexico
|
Rick Ehrenberg did a good article on these rear ends a year or so ago in the magazine. According to him there is nothing wrong with the Mopar c-clips as they are beefy enough not to cause issues. So unless its a race application where the rules don't allow c-clips, just go with them.
If necessary you should check with Moser's. I have that article, it even says Moser was going to make a spool for the 9.25, they never did.
2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.
|
|
|
Re: Do they make a 9.25 c clip eliminator
[Re: kenworth_goose]
#1942449
10/31/15 08:14 PM
10/31/15 08:14 PM
|
Joined: May 2006
Posts: 1,260 New Mexico
Adobedude
pro stock
|
pro stock
Joined: May 2006
Posts: 1,260
New Mexico
|
doesn't the 8 3/4 use the same spline as the 9.25? I thought you could put bearings and retainers on the ends of the axles. You have to weld the 8 3/4 ends onto the 9.25 housing ends and get new axles, and I think you can still use the same brakes. I sent Dr. Diff an email Friday to confirm this.
2001 Dodge Dakota 408 All Motor 11.27 @ 117.83 mph 2017 NM Mopar Challenge Series Champion.
|
|
|
|
|
|