If you’re building a classic Mopar muscle car, chances are if your machine came from the factory with anything bigger than an 318, you’ve got a Chrysler 8¾ rear end sitting beneath its belly. The only Banjo-style axle produced by Chrysler, the 8¾ was first introduced 1957, and ran its course by 1974. Although the Dana 60s were notoriously “beefier,” the 8¾ is “the” rear end to run on the street, particularly as there are so many aftermarket parts available (making its rebuild significantly more affordable).

Read the rest of the article at Directly Connected Magazine HERE:

good article

Thank you!