|
|
Re: Hemi solid lifters
[Re: B G Racing]
#185495
01/06/09 12:11 PM
01/06/09 12:11 PM
|
Joined: Mar 2006
Posts: 2,675
Mt. Eden Ky.
Hemi Allstate
master
|
master
Joined: Mar 2006
Posts: 2,675
Mt. Eden Ky.
|
Bob,
The Howards EDM lifters are taller as they are actually AMC.
Here is a picture by 440 Jim i think.
Mark
1996 Ram 1500 Sport
1968 road runner
1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019
|
|
|
Re: Hemi solid lifters
[Re: B G Racing]
#185497
01/06/09 01:21 PM
01/06/09 01:21 PM
|
Joined: Aug 2003
Posts: 43,161
Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 43,161
Bend,OR USA
|
I have a set of the new Comp AMC roller lifters for one of my next projects, the cups are quiet a bit higher than the Comp Mopars, maybe you should have them send you one to try on the problem motor  Is the exhaust pushrods rubbing hard on a aluminum block?
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
Re: Hemi solid lifters
[Re: Cab_Burge]
#185498
01/06/09 01:39 PM
01/06/09 01:39 PM
|
Joined: Mar 2006
Posts: 9,910
Eighty Four, PA
B G Racing
OP
master
|
OP
master
Joined: Mar 2006
Posts: 9,910
Eighty Four, PA
|
Quote:
I have a set of the new Comp AMC roller lifters for one of my next projects, the cups are quiet a bit higher than the Comp Mopars, maybe you should have them send you one to try on the problem motor Is the exhaust pushrods rubbing hard on a aluminum block?
Thanks Cab and everyone for the help.Sam at Indy has a cam with the correct base circle and AMC lifters on the way.Moparts is great,thanks again all. 
|
|
|
|
|
|
|
