Michigan 77 Bearing Number Question - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Michigan 77 Bearing Number Question

Print Thread

Michigan 77 Bearing Number Question #183956 01/04/09 07:33 PM 01/04/09 07:33 PM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate OP master
Hemi Allstate OP master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	Can anyone tell me what application these bearings are for? I have had them on the shelf and I am not sure what they fit. They are full groove. I cannot find these numbers listed. Perhaps it has been superceded with a new number. The thrust bearing number is MB 2625 H. The upper half says Clevite 77 and the lower says Michigan 77 The others say Michigan 77 MB 2067 P these are std. size. They were supposed to fit 426 Hemi. Thanks, Mark http://marsh-racing.com/Mark%20Mahorney-Allstate.htm 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Re: Michigan 77 Bearing Number Question [Re: Hemi Allstate] #183957 01/05/09 12:36 AM 01/05/09 12:36 AM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate OP master
Hemi Allstate OP master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	Anybody know where to look for some info on these? Thanks, Mark http://marsh-racing.com/Mark%20Mahorney-Allstate.htm 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Re: Michigan 77 Bearing Number Question [Re: Hemi Allstate] #183958 01/05/09 12:46 AM 01/05/09 12:46 AM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	Mark, I should be able to look it up tommorrow for you. Will send info along with that other estimate. Todd RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Re: Michigan 77 Bearing Number Question [Re: CompWedgeEngines] #183959 01/05/09 09:56 AM 01/05/09 09:56 AM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate OP master
Hemi Allstate OP master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	That would be great, Todd. Thanks, Mark http://marsh-racing.com/Mark%20Mahorney-Allstate.htm 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Re: Michigan 77 Bearing Number Question [Re: Hemi Allstate] #183960 01/05/09 10:52 AM 01/05/09 10:52 AM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	Mark, I'l pass along in the email as well. MB2625H is out of a set of MB1277H ( or HG) and the other is the same, but out of MB1277P P series bearing). Todd RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Re: Michigan 77 Bearing Number Question [Re: CompWedgeEngines] #183961 01/05/09 11:51 AM 01/05/09 11:51 AM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate OP master
Hemi Allstate OP master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	Thanks Todd, BTW I got my rods this AM. I appreciate the quick shipping, and service. Mark http://marsh-racing.com/Mark%20Mahorney-Allstate.htm 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1