Michigan 77 Bearing Number Question
#183956
01/04/09 07:33 PM
01/04/09 07:33 PM
|
Joined: Mar 2006
Posts: 2,675 Mt. Eden Ky.
Hemi Allstate
OP
master
|
OP
master
Joined: Mar 2006
Posts: 2,675
Mt. Eden Ky.
|
Can anyone tell me what application these bearings are for? I have had them on the shelf and I am not sure what they fit. They are full groove. I cannot find these numbers listed. Perhaps it has been superceded with a new number. The thrust bearing number is MB 2625 H. The upper half says Clevite 77 and the lower says Michigan 77 The others say Michigan 77 MB 2067 P these are std. size. They were supposed to fit 426 Hemi. Thanks, Mark
1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019
|
|
|
Re: Michigan 77 Bearing Number Question
[Re: Hemi Allstate]
#183957
01/05/09 12:36 AM
01/05/09 12:36 AM
|
Joined: Mar 2006
Posts: 2,675 Mt. Eden Ky.
Hemi Allstate
OP
master
|
OP
master
Joined: Mar 2006
Posts: 2,675
Mt. Eden Ky.
|
Anybody know where to look for some info on these? Thanks, Mark
1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019
|
|
|
Re: Michigan 77 Bearing Number Question
[Re: Hemi Allstate]
#183958
01/05/09 12:46 AM
01/05/09 12:46 AM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
Mark, I should be able to look it up tommorrow for you. Will send info along with that other estimate.
Todd
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: Michigan 77 Bearing Number Question
[Re: CompWedgeEngines]
#183959
01/05/09 09:56 AM
01/05/09 09:56 AM
|
Joined: Mar 2006
Posts: 2,675 Mt. Eden Ky.
Hemi Allstate
OP
master
|
OP
master
Joined: Mar 2006
Posts: 2,675
Mt. Eden Ky.
|
That would be great, Todd. Thanks, Mark
1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019
|
|
|
Re: Michigan 77 Bearing Number Question
[Re: Hemi Allstate]
#183960
01/05/09 10:52 AM
01/05/09 10:52 AM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
Mark,
I'l pass along in the email as well.
MB2625H is out of a set of MB1277H ( or HG) and the other is the same, but out of MB1277P P series bearing).
Todd
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: Michigan 77 Bearing Number Question
[Re: CompWedgeEngines]
#183961
01/05/09 11:51 AM
01/05/09 11:51 AM
|
Joined: Mar 2006
Posts: 2,675 Mt. Eden Ky.
Hemi Allstate
OP
master
|
OP
master
Joined: Mar 2006
Posts: 2,675
Mt. Eden Ky.
|
Thanks Todd, BTW I got my rods this AM. I appreciate the quick shipping, and service. Mark
1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019
|
|
|
|
|