The intake is "598" with lots of work.
I have spacers screwed fast then I blended spacers to intake.
I could not stand look of spacer hanging over intake looked tacky.
I don't think dividers will hurt at all some stuff you can't see in the picture😏

Some beautiful work there for sure...ought to be a beast...best of luck with it...!!!!

Rickster

Very nice work by everyone involved. Cannot wait to see how this runs.

X2 on the sexy valve covers

Ya know every time I see a w8/w9 build I always wish my gen 3 could look as cool as these motors. Looks awesome and I'm sure it will perform even better!!

Very nice, look forward to hearing results.

My only concern is how light the head is and lifting it.
The intake won't hurt at all w the amount of spray that will be used imo...tuning the cylinders will be a learning curve because I'm the only one around here spraying these heads and not much dAta out there.
In the future the intake will be cut in half and enlarged alot.

I bought a junk yard distributor , cut the housing and shaft , turned a nylon plug and done deal.
total cost 15.00 and about 1/2 hour.

Looks good Andy, I would like to see so fuel damns in the intake. It works well on mine.

Yeap.....pretty good stuff huh!!!

Would sure look good in my 68 Notchback!! Two questions, what lifters are those and are the rockers W9 or W9RP?? Thanks

Thanks guys TD rockers .775 offset 1.8/1.75
Lifters are not off the shelf deals but are GS used in outlaw 410 motors...They are tuff sobs

That sexy piston looks familiar

I LIKE IT!
Looks a little like mine.

[hope to see you in a car soonquote=Darryls-Demon]I LIKE IT!
Looks a little like mine. [/quote] I talk to you at Fontana you got a screaming deal on that motorwould love to see it in a car soon

Darryl needs to sell me that motor. Would look good in my Stratus

Darryl needs my other mill for his street project. Would be much better suited for his goals.

any pic of the chamber softening what comp and quench did you end up with pm if you like .cheers

Sorry can not share that picture/or that info.

I talk to you at Fontana you got a screaming deal on that motorwould love to see it in a car soon [/quote]

It was great meeting you at Fontana, I walked back to your pits twice after we talked to take some pics of your car but each time I missed you.
Will you be at Fontana next month?

AL, my little motor would not get the job done for you in your car.
See you next month in Fontana.

Darryl needs a lighter car with a shorter wheel base, but you are right I would like to do a 420 cu in 9 inch deck motor.
They make lots of power.