Hi - wondering what you guys are doing for breathers? Not running evac or external tank, just want to run a push in style that stays in place and won't leak under hard acceleration. I've used k and n and moroso push in style and they were ok, but wondering if there are better options out there. Any suggestions and or
Pics would be appreciated. Thanks!

http://www.jegs.com/p/JEGS-Performance-P...754863/10002/-1

better option.... more $$$

J Body - I like those, and have used them before. They have a fitting to go to evac or perhaps an air cleaner. Was looking for something more of a stand alone breather. Thanks

Get stock breather grommets from Chrysler and add the holes to your Indy covers. Use stock breathers from 70s/80s Chrysler V8 engines. Simple Bridgeport job.

I have the Auto zone specials on the Valiant. I run wrist bands on them and change often.

I went with a puke tank setup with the Avenger.

I just use these stock type breathers with my Mancini covers. I just run the hose to the rear of the block in so no oil would spit out on the valve covers but no oil spits out the hoses at all. Ron

Thanks for the pic, Ron! Btw, tried to send you a PM...it's time to clean out the mailbox!

Tony there was only 2 PM in my box but when I just looked with this new board it says I have 20 pages !! It must have saved all the PM's I ever deleted. I dont see a delete all as it will take me hrs to check each one on each page to delete. You can e-mail me if you like at rn383man@yahoo.com Ron

HELLO I GOT A SET FORM JEG,S FOR MY INDY VALVE COVERS . THEY ARE FROM EARL,S. ONE IS A BREATHER AND THE OTHER ONE HAS A PCV VALVE ALREADY MADE IN THE BREATHER ,I THINK I PAID AROUND $84.00 FOR THE PR. THEY LOOK GOOD IN THE INDY VALVE COVERS . THANKS MOPARTS !!