Previous Thread
Next Thread
Print Thread
Page 3 of 3 1 2 3
Re: whose the fastest on an 8 3/4 [Re: mcat4321] #1771458
03/05/15 05:41 PM
03/05/15 05:41 PM
Joined: Jan 2004
Posts: 8,237
fredericksburg,va
C
cudaman1969 Offline
master
cudaman1969  Offline
master
C

Joined: Jan 2004
Posts: 8,237
fredericksburg,va
Quote:

my opinion is, years in use is the biggest killer.
metal fatigue of the housing flexing over and over.
the older it is, the less force it takes to meet the fail line. the axle housing flexes putting extreme pressure on the caps in turn binding carrier eventually the gears cant handle the extra pressure. then new stronger gears are put in,same thing happens to axles so their replaced so now the carrier cant handle the strain, then comes a spool.. then the caps fail. so a new pumpkin is used.. the housing ignored most all the time...



IMO i think flex actually helps the life span, when flexing stops it brakes. think of the slipping clutches in the pro classes.

Re: whose the fastest on an 8 3/4 [Re: KOS] #1771459
03/05/15 05:51 PM
03/05/15 05:51 PM
Joined: Jan 2004
Posts: 8,237
fredericksburg,va
C
cudaman1969 Offline
master
cudaman1969  Offline
master
C

Joined: Jan 2004
Posts: 8,237
fredericksburg,va
Quote:

ive been low 10s @3300lbs for 3seasons and never hurt anything.ive had good luck with 4.88s gear sets seems the thicker the ring gear they seem to last.ive ripped the teeth off of many 4.10s...too bad they dont offer a pro gear in a variety of ratios for the 8.75



make your own, heat in oven to 425 degrees for four hours the let cool slowly. Softens it up to give, not shatter, street gears are very hard and brittle so they last, not good for racing. This is old guy stuff, Noah used it on the ark.

Re: whose the fastest on an 8 3/4 [Re: cudaman1969] #1771460
03/05/15 07:55 PM
03/05/15 07:55 PM
Joined: Aug 2003
Posts: 1,574
K
KOS Offline
pro stock
KOS  Offline
pro stock
K

Joined: Aug 2003
Posts: 1,574
haha ya i did that.....callled it the hutch treatment...its what hutch transmission reconmended.they would last alittle longer just got sick of constantly fixing 8.75 junk went to dana60 on my 5th one never ever broken anything in any of them.

Re: whose the fastest on an 8 3/4 [Re: KOS] #1771461
03/05/15 09:23 PM
03/05/15 09:23 PM
Joined: Jan 2003
Posts: 32,394
Q
Quicktree Offline
I Win
Quicktree  Offline
I Win
Q

Joined: Jan 2003
Posts: 32,394
we should do a thread about how many people have blew up an 8 - 3/4 but we would run out of band width

Re: whose the fastest on an 8 3/4 [Re: Quicktree] #1771462
03/05/15 11:48 PM
03/05/15 11:48 PM
Joined: Feb 2011
Posts: 4,302
Nebraska
72Swinger Offline
master
72Swinger  Offline
master

Joined: Feb 2011
Posts: 4,302
Nebraska
Whos the fastest? I think Buddy Baker went 212 mph or something like that with an 8 3/4?


Mopar to the bone!!!
Re: whose the fastest on an 8 3/4 [Re: 72Swinger] #1771463
03/06/15 07:43 PM
03/06/15 07:43 PM
Joined: Feb 2003
Posts: 3,998
GO BUCKS !!!!!!!
3
340RICK Offline
master
340RICK  Offline
master
3

Joined: Feb 2003
Posts: 3,998
GO BUCKS !!!!!!!
Quote:

Whos the fastest? I think Buddy Baker went 212 mph or something like that with an 8 3/4?



Bingo

Re: whose the fastest on an 8 3/4 [Re: 340RICK] #1771464
03/07/15 11:50 AM
03/07/15 11:50 AM
Joined: Feb 2009
Posts: 401
dayton,ohio
R
ROSSIO Offline
mopar
ROSSIO  Offline
mopar
R

Joined: Feb 2009
Posts: 401
dayton,ohio
WENT 9.16 W/1.35 60FT 3350LB DART ON 10.5
FIGURED I'D BETTER QUIT WHILE I WAS AHEAD
and put a dana 60 in----now 8.70's SAFLEY


1970 DART B1MC N/A 8.86@ [Email]155 3200 lb on 275 DR 5.30 @ 130 1/8
Page 3 of 3 1 2 3






Powered by UBB.threads™ PHP Forum Software 7.7.1