Were these used on a 73 / 74? I'm pretty certain they weren't.

Nope, just 71-2

So I have this customer that insists the splash shields I show above are missing from this picture of his car (I know those aren't for a 73 Satellite). I'd like to help but I don't recognize this are or the splash shield that would go here.

These are the headlight splash shields. Other than the big pass side engine well splash for 400" engines these are the only splash shields I know of on the 73/74 Satellite.

You know your Satellites!!!

That small strip in frt of the lower edge of the radiator radiator, someone sent me a photo and was supposed to get me one. I need to get one so I can duplicate and add to my kits.

Engine well one for big blocks, the original rubber ones burned up. I had a customer complain about mine getting hot (it's RIGHT by the exhaust manifold). So I bought a small roll of $$$ .093" black silicone. Nice but expensive. Obviously glossier than the OEM rubber one.

I know of the ones where the underside of the fenders meets the top of the firewall/cowl. On 71-72 they were masticated rubber with plastic push pins. 73-74 they were molded plastic. Though all will interchange.

Headlight ones are a given.

The picture of the plate he emailed me does show what appears to have been a seal along the edges.

At this point until he can hand me one to duplicate (if there was one) then my hands are tied.

Thanks for the effort. I'll try to reciprocate (little engine humor).

I have the ones that go in front of the radiator down next to the front valence. I'll see if I can dig them out and make an image.

Okay I found the valence seals. Here is a pic. I went and looked at your ebay site and these look pretty similar if not the same as the charger ones you sell.

Here are the square seals where the fender apron and cowl meet.