I have a 66-67 Plymouth Belvadere/Sattelite/GTX trunk lid and it has these small gilled air vents on the top of the trunk lid. There are about 4 raised gills that look factory as I can't see where someone modified it to put these in. There are 2 sets of these. They are about 2 feet from each other in the middle of trunk. Are these factory or what? Also, is the 66 and 67 trunk lid the same and will it interchange?

Thnks,

Wizard

They are different, 66 has different (shorter and wider I believe) for the '66 reverse lights in the tail panel. You should be able to modify/cut either to work though.

And no that doesn't sound factory at all. Pics?

pic 2

pic 3

pic 4. Can anyone tell if this is a 66 or 67 trunk?

Wizard

Dfinitely not factory. Why would they allow water or fumes in the trunk when they went so far to plug and seal all the holes with a deck lid seal, rubber floor plugs and taillight seals?

Yep...just added in/punched louvers someone did in the past.

Yeah no way its factory and thats a 67 lid

Thnks. They sure did nice body work though as you look at it close it looks factory.

Wizard

You can buy a louver tool on line.

Yes, the guy who just bought it said that's how they did it with a special stamp tool. Mostly they did it on hoods. old hot rodders. Said he was going to fix it when he bought it.

wizard