Re: mr p bodys rampage
[Re: all spooled up]
#1667609
09/04/14 09:06 PM
09/04/14 09:06 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
if u need a hand getting the rampage back together for Norwalk race. ill drive out give u hand working on her. in 12 hours 2 guys can get a lot of work done   
Thanks a TON.. gotta get the trans back.. after that
I should have it back together in a day or two.. gotta
do a little more wiring on the injection but that
wont take long... just gotta teach the injection...
but I sure appreciate the offer.. again.. thanks a TON..
I cant really finish up the wiring because the engine
and trans are out...if I lift the car on the hoist
without it.. it'll tip off it
|
|
|
Re: mr p bodys rampage
[Re: B3422W5]
#1667612
09/04/14 09:17 PM
09/04/14 09:17 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Quote:
if u need a hand getting the rampage back together for Norwalk race. ill drive out give u hand working on her. in 12 hours 2 guys can get a lot of work done
It's a show poodle, he ain't gonna race it. 
Besides he is a real old billy goat and is scared to death of the go pedal   
Naaa... its no show poodle.. but your right on the
OLD part... I cracked a rib when I was up in Canada
hunting when I slipped and fell on a rock.. but I
did save my bow...so I sure feel old the last week...
but as soon as I get my trans I'll be back in the shop
|
|
|
Re: mr p bodys rampage
[Re: dizuster]
#1667613
09/04/14 09:21 PM
09/04/14 09:21 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Sorry Mike, I thought you were still dealing with your wife's mom's deal. I'll slap the valve body back in it tomorrow. Plan on getting it Saturday morning.
Good enough Scott... see ya Sat morning... thanks
for taking care of that... they are putting off the
funeral thing for a later time and having a wake thing.
but I did get the place cleared out
|
|
|
Re: mr p bodys rampage
[Re: all spooled up]
#1667614
09/05/14 03:30 AM
09/05/14 03:30 AM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
if u need a hand getting the rampage back together for Norwalk race. ill drive out give u hand working on her. in 12 hours 2 guys can get a lot of work done
Mac... I have to say that your offer to help is one FINE
GESTURE that is REALLY APPRECIATED but if I can get
it done I WILL be there just to say thank you... you
sure dont get offers like this very often... if ever
THANKS AGAIN 
I do have a buddy local to me that was/is gonna give
me a hand installing the engine/trans
|
|
|
Re: mr p bodys rampage
[Re: Quicktree]
#1667619
09/05/14 03:14 PM
09/05/14 03:14 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
dang Mike you are to wear out the bolts putting that thing together and taking it apart.
The trans was messing up so I pulled the engine and
trans plus I'm installing injection on it.. its
much easier to get the harness through the firewall
without the engine in it.. it is pretty close in behind
the engine to the firewall... when I get the engine
and trans back in I need to mount the new fuel pump
and filters and finish up the wiring..... so yeah
I am trying to wear out the bolts.......
by the way... Happy B-Day
|
|
|
Re: mr p bodys rampage
[Re: all spooled up]
#1667620
09/05/14 06:22 PM
09/05/14 06:22 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Got the car hauler fixed today.. had a short in the brake lights and wouldnt turn on the trailer brakes.. thats not a good thing when your running 24K#.. that happened last year on drag week and I scabbed it together to get home.... now I'll pick up the trans in the morning and start on the Rampage... the hauler still need a good bath
|
|
|
Re: mr p bodys rampage
[Re: Mr340]
#1667622
09/11/14 07:23 PM
09/11/14 07:23 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Mike how is it going? will we see the Rampage @ Norwalk this Weekend? 
Its coming along but no.. it wont be there... I still
havent even fired it up yet... the engine/trans is
in and I'm still doing some wiring and fuel work...
I wont even show up there... that would take away from
me working on it... once I do get it fired up I want
to start teaching it... some things took longer than
I expected... plus I messed up and left a elec plug
over at Scott's house for the trans( the OD connector)
so I need to get that yet... just more stuff to do
|
|
|
Re: mr p bodys rampage
[Re: MR_P_BODY]
#1667623
09/11/14 07:52 PM
09/11/14 07:52 PM
|
Joined: Jan 2003
Posts: 1,009
Richmond Twp. Mi.
Mr340
super stock
|
super stock
Joined: Jan 2003
Posts: 1,009
Richmond Twp. Mi.
|
Quote:
Quote:
Mike how is it going? will we see the Rampage @ Norwalk this Weekend?
Its coming along but no.. it wont be there... I still
havent even fired it up yet... the engine/trans is
in and I'm still doing some wiring and fuel work...
I wont even show up there... that would take away from
me working on it... once I do get it fired up I want
to start teaching it... some things took longer than
I expected... plus I messed up and left a elec plug
over at Scott's house for the trans( the OD connector)
so I need to get that yet... just more stuff to do
Glad to hear it's coming along but would have been nice to see it run down the track @ Norwalk  Things always take longer than expected, that's just part of the hobby Nostalga Drags at Milan in 2 weeks....maybe there? 
|
|
|
Re: mr p bodys rampage
[Re: Mr340]
#1667624
09/11/14 08:05 PM
09/11/14 08:05 PM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Quote:
Quote:
Mike how is it going? will we see the Rampage @ Norwalk this Weekend?
Its coming along but no.. it wont be there... I still
havent even fired it up yet... the engine/trans is
in and I'm still doing some wiring and fuel work...
I wont even show up there... that would take away from
me working on it... once I do get it fired up I want
to start teaching it... some things took longer than
I expected... plus I messed up and left a elec plug
over at Scott's house for the trans( the OD connector)
so I need to get that yet... just more stuff to do
Glad to hear it's coming along but would have been nice to see it run down the track @ Norwalk Things always take longer than expected, that's just part of the hobby Nostalga Drags at Milan in 2 weeks....maybe there?
Dont know... I dont know yet if I'll have to come up
with a race program over the street program on the
injection... pretty much like Eddie Miller on DW..
he had the street tune up yesterday and MIGHT have
been a bit slower... I have to look at all this after
it learns the street... It might just try to keep
things at stoichiometric and thats sure not the quickest
on the track
|
|
|
Re: mr p bodys rampage
[Re: MR_P_BODY]
#1667625
09/12/14 09:46 AM
09/12/14 09:46 AM
|
Joined: Feb 2003
Posts: 1,942
Metro Detroit
OUTLAWD
top fuel
|
top fuel
Joined: Feb 2003
Posts: 1,942
Metro Detroit
|
I am not familiar with the Holley ECU, however, IIRC some of the kits allow you to target a certain AFR at WOT, so you could dial part throttle to be stoich and WOT to be 12.5 for example. I imagine that would take a decent amount of WOT time to learn though... Good luck with it! I look forward to seeing it out there running. Saw the car Downriver or Telegraph, can't recall which...
Faster, Faster until the thrill of speed overcomes the fear of death...
71 Swinger - slowly collecting dust/parts
66 Belv. II - just a streetcar
88 Mustang - turbo LS beater
|
|
|
Re: mr p bodys rampage
[Re: OUTLAWD]
#1667626
09/12/14 10:33 AM
09/12/14 10:33 AM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
I am not familiar with the Holley ECU, however, IIRC some of the kits allow you to target a certain AFR at WOT, so you could dial part throttle to be stoich and WOT to be 12.5 for example. I imagine that would take a decent amount of WOT time to learn though...
Good luck with it! I look forward to seeing it out there running. Saw the car Downriver or Telegraph, can't recall which...
Yeah I ran the Downriver cruise.... was in the K-mart
parking lot
|
|
|
|
|
