Posted By: all spooled up
mr p bodys rampage - 09/05/14 12:53 AM
if u need a hand getting the rampage back together for Norwalk race. ill drive out give u hand working on her. in 12 hours 2 guys can get a lot of work done
Quote:
if u need a hand getting the rampage back together for Norwalk race. ill drive out give u hand working on her. in 12 hours 2 guys can get a lot of work done
Quote:
if u need a hand getting the rampage back together for Norwalk race. ill drive out give u hand working on her. in 12 hours 2 guys can get a lot of work done
Quote:Quote:
if u need a hand getting the rampage back together for Norwalk race. ill drive out give u hand working on her. in 12 hours 2 guys can get a lot of work done
It's a show poodle, he ain't gonna race it.
Besides he is a real old billy goat and is scared to death of the go pedal
Quote:
Sorry Mike, I thought you were still dealing with your wife's mom's deal. I'll slap the valve body back in it tomorrow. Plan on getting it Saturday morning.
Quote:
if u need a hand getting the rampage back together for Norwalk race. ill drive out give u hand working on her. in 12 hours 2 guys can get a lot of work done
Quote:
dang Mike you are to wear out the bolts putting that thing together and taking it apart.
Quote:
Mike how is it going? will we see the Rampage @ Norwalk this Weekend?
Quote:Quote:
Mike how is it going? will we see the Rampage @ Norwalk this Weekend?
Its coming along but no.. it wont be there... I still
havent even fired it up yet... the engine/trans is
in and I'm still doing some wiring and fuel work...
I wont even show up there... that would take away from
me working on it... once I do get it fired up I want
to start teaching it... some things took longer than
I expected... plus I messed up and left a elec plug
over at Scott's house for the trans( the OD connector)
so I need to get that yet... just more stuff to do
Quote:Quote:Quote:
Mike how is it going? will we see the Rampage @ Norwalk this Weekend?
Its coming along but no.. it wont be there... I still
havent even fired it up yet... the engine/trans is
in and I'm still doing some wiring and fuel work...
I wont even show up there... that would take away from
me working on it... once I do get it fired up I want
to start teaching it... some things took longer than
I expected... plus I messed up and left a elec plug
over at Scott's house for the trans( the OD connector)
so I need to get that yet... just more stuff to do
Glad to hear it's coming along but would have been nice to see it run down the track @ Norwalk Things always take longer than expected, that's just part of the hobby Nostalga Drags at Milan in 2 weeks....maybe there?
Quote:
I am not familiar with the Holley ECU, however, IIRC some of the kits allow you to target a certain AFR at WOT, so you could dial part throttle to be stoich and WOT to be 12.5 for example. I imagine that would take a decent amount of WOT time to learn though...
Good luck with it! I look forward to seeing it out there running. Saw the car Downriver or Telegraph, can't recall which...