440 victor porting ? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 440 victor porting ?

Print Thread

440 victor porting ? #1634042 06/15/14 04:59 PM 06/15/14 04:59 PM
Joined: Feb 2005 Posts: 174 Central Illinois Don_440 OP member
Don_440 OP member Joined: Feb 2005 Posts: 174 Central Illinois	Has anybody done this and seen a lower e.t.? The reason I ask is because my heads flow about 320 and from what i have found is a otb victor will flow about 290(slight restriction).

Re: 440 victor porting ? [Re: Don_440] #1634043 06/15/14 05:32 PM 06/15/14 05:32 PM
Joined: Jul 2004 Posts: 19,318 State of confusion T Thumperdart I Live Here
Thumperdart I Live Here T Joined: Jul 2004 Posts: 19,318 State of confusion	My 383 Victor was fully ported my Ed Mosler and although I have no clue nor do I care about flow numbers, it flat out works and pulls past 7000 w/ease............. 72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....

Re: 440 victor porting ? [Re: Thumperdart] #1634044 06/15/14 06:54 PM 06/15/14 06:54 PM
Joined: Jun 2013 Posts: 240 Ft. Wayne, IN. Q QTR MILR enthusiast
QTR MILR enthusiast Q Joined: Jun 2013 Posts: 240 Ft. Wayne, IN.	The answer you are after depends on the rest of the combo... If the flow of the intake is the limiting factor before then there will be a good gain Last edited by QTR MILR; 06/15/14 08:09 PM.

Re: 440 victor porting ? [Re: QTR MILR] #1634045 06/15/14 07:57 PM 06/15/14 07:57 PM
Joined: Mar 2007 Posts: 3,300 Northern Indiana Dunnuck Racing master
Dunnuck Racing master Joined: Mar 2007 Posts: 3,300 Northern Indiana	The Victor Intakes Have ported have all shown gains. Two tenths in my Wife's Coronet, 25 horsepower on the dyno on Scott's440, 30 horsepower on a standard port Victor headed 505. If your heads are flowing320, and your Victor is stock, it needs help. Keith www.dunnuckracing.com

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1