|
|
904 trans band adjustment
#1626855
05/31/14 12:43 AM
05/31/14 12:43 AM
|
Joined: Jan 2012
Posts: 2,645
Stuttgart, Arkansas
rickseeman
OP
master
|
OP
master
Joined: Jan 2012
Posts: 2,645
Stuttgart, Arkansas
|
All my books are for the 727. How do you adjust the bands on a 904? Is it tighten to 6 ft lbs and then back off 2 turns? It's in a 1970 Dart 318 ci. Thanks for the help.
2011 Drag Pak Challenger
|
|
|
Re: 904 trans band adjustment
[Re: rickseeman]
#1626856
05/31/14 01:11 AM
05/31/14 01:11 AM
|
Joined: Jan 2003
Posts: 9,826
las vegas
70AARcuda
master
|
master
Joined: Jan 2003
Posts: 9,826
las vegas
|
Quote:
All my books are for the 727. How do you adjust the bands on a 904? Is it tighten to 6 ft lbs and then back off 2 turns? It's in a 1970 Dart 318 ci. Thanks for the help.
If you have a double wrap rear band..which all the V8 904 have...and i could be wrong...the adjustment is 4 turns..tighten 72 inch lbs..or snug...
anyway...i got 4 904s for bracket racing..and they are adjusted 4 turns with double wrap bands.
Last edited by 70AARcuda; 05/31/14 01:12 AM.
Tony
70 AARCuda Vitamin C
71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield)
71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas)
71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)
|
|
|
Re: 904 trans band adjustment
[Re: rickseeman]
#1626857
05/31/14 01:14 AM
05/31/14 01:14 AM
|
Joined: Nov 2003
Posts: 36,040
Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,040
Lincoln Nebraska
|
I had trouble getting to 72 in lbs on my last one (I was torquing more than I knew I should be doing & still could not reach 72 in lbs) so since I had the pan off I adjusted the clearance between both levers (kickdown/low and reverse) and the round flat button in the center of the pistons that the levers contacts per advice from Kunkel cuz that clearance is the bottom line that you want right
live every 24 hour block of time like it's your last day on earth
|
|
|
|
|
|
|
