Holley carb.question - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Holley carb.question

Print Thread

Holley carb.question #1618537 05/10/14 10:30 PM 05/10/14 10:30 PM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	I have a Holley spread bore list number 8210-1 and I do not know what size it is. I am thinking 850. Before everyone says its a 6210-1 it is not it's 8210-1. It has front and rear metering blocks,air screws on the front block. 50cc pump on the front , standard pump on the rear. No fuel transfer tube, center hung floats. I cannot find anything about it.

Re: Holley carb.question [Re: jwmotors] #1618538 05/10/14 10:55 PM 05/10/14 10:55 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Look it up here http://www.holley.com/data/TechService/Technical/Carb%20Numerical%20Listing.pdf

Re: Holley carb.question [Re: MR_P_BODY] #1618539 05/10/14 11:03 PM 05/10/14 11:03 PM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	I had already looked on there and it goes from 8207 to 8276

Re: Holley carb.question [Re: jwmotors] #1618540 05/10/14 11:40 PM 05/10/14 11:40 PM
Joined: Jan 2003 Posts: 5,990 Anoka County, MN L Leigh master
Leigh master L Joined: Jan 2003 Posts: 5,990 Anoka County, MN	You need to look at an Holley Illustrated Parts and Spec manual. I have a couple, but they're packed away in storage.

Re: Holley carb.question [Re: Leigh] #1618541 05/10/14 11:45 PM 05/10/14 11:45 PM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	I know , that's what I hope someone has handy.

Re: Holley carb.question [Re: jwmotors] #1618542 05/11/14 12:06 AM 05/11/14 12:06 AM
Joined: Sep 2005 Posts: 1,551 baldwinsville new york A a493demon pro stock
a493demon pro stock A Joined: Sep 2005 Posts: 1,551 baldwinsville new york	I looked in my holley book and didn't see the number .

Re: Holley carb.question [Re: a493demon] #1618543 05/11/14 12:10 AM 05/11/14 12:10 AM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	The number under the list number is 3255, is that a date code ?

Re: Holley carb.question [Re: jwmotors] #1618544 05/11/14 03:01 PM 05/11/14 03:01 PM
Joined: Jan 2003 Posts: 25,821 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,821 Rio Linda, CA	Probably a 6210...650 cfm 4165 series spreadbore. http://www.holley.com/0-6210.asp The INTERNET, the MISinformation superhighway

Re: Holley carb.question [Re: John_Kunkel] #1618545 05/11/14 03:59 PM 05/11/14 03:59 PM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	My mistake on the list number , it is 6210-1, but here is a photo of the carb. And it differs from the 6210 carbs I have found. No transfer tube,center hung floats, dual feed. And it is a spread bore. For some reason I was thinking it is a 800. I have had this thing for years and need to put it on a 454 but if it is a 650 I hate to spend any money working on it. 8141178-carb005.jpg (292 downloads)

Re: Holley carb.question [Re: jwmotors] #1618546 05/11/14 04:20 PM 05/11/14 04:20 PM
Joined: Feb 2005 Posts: 5,221 Branson, Mo. J joedust451 super gas
joedust451 super gas J Joined: Feb 2005 Posts: 5,221 Branson, Mo.	Quote: My mistake on the list number , it is 6210-1, but here is a photo of the carb. And it differs from the 6210 carbs I have found. No transfer tube,center hung floats, dual feed. And it is a spread bore. For some reason I was thinking it is a 800. I have had this thing for years and need to put it on a 454 but if it is a 650 I hate to spend any money working on it. Its a 650 cfm, It has been modified, looks like they installed pyramid bowls. Here it is in stock form. http://www.ebay.com/itm/CHEVY-HOLLEY-416...aa0&vxp=mtr 75 Duster, 451 10.87 @ 123.58 NA 97 Z28 6sp., 12.01 @ 115 on a 100 shot 71 Swinger. 360 magnum. 12.58 @ 105 78 cutlass, 469 BBC. 12.70 @ 108 on street tires. http://www.youtube.com/watch?v=Z2kqNmMfheU

Re: Holley carb.question [Re: joedust451] #1618547 05/11/14 04:26 PM 05/11/14 04:26 PM
Joined: Feb 2005 Posts: 5,221 Branson, Mo. J joedust451 super gas
joedust451 super gas J Joined: Feb 2005 Posts: 5,221 Branson, Mo.	Heres the 800 DPer. 6910, It has Annular boosters in back. http://www.ebay.com/itm/Rebuilt-Holley-H...df6&vxp=mtr 75 Duster, 451 10.87 @ 123.58 NA 97 Z28 6sp., 12.01 @ 115 on a 100 shot 71 Swinger. 360 magnum. 12.58 @ 105 78 cutlass, 469 BBC. 12.70 @ 108 on street tires. http://www.youtube.com/watch?v=Z2kqNmMfheU

Re: Holley carb.question [Re: joedust451] #1618548 05/11/14 04:39 PM 05/11/14 04:39 PM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	That is kinda what I was thinking, someone converted it. I found this 6213 on ebay it is a perfect match other than the list number. http://www.ebay.com/itm/6213-800-CFM-HOL...433&vxp=mtr

Re: Holley carb.question [Re: jwmotors] #1618549 05/11/14 04:52 PM 05/11/14 04:52 PM
Joined: Feb 2005 Posts: 5,221 Branson, Mo. J joedust451 super gas
joedust451 super gas J Joined: Feb 2005 Posts: 5,221 Branson, Mo.	Quote: That is kinda what I was thinking, someone converted it. I found this 6213 on ebay it is a perfect match other than the list number. http://www.ebay.com/itm/6213-800-CFM-HOL...433&vxp=mtr The 6213 is the one i like. 75 Duster, 451 10.87 @ 123.58 NA 97 Z28 6sp., 12.01 @ 115 on a 100 shot 71 Swinger. 360 magnum. 12.58 @ 105 78 cutlass, 469 BBC. 12.70 @ 108 on street tires. http://www.youtube.com/watch?v=Z2kqNmMfheU

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1