Gettin the 65 valiant ready for paint - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Gettin the 65 valiant ready for paint

Print Thread

Gettin the 65 valiant ready for paint #1614270 04/30/14 08:05 PM 04/30/14 08:05 PM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT OP pro stock
SB449VALIANT OP pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	Just doing the final eye inspection with a 340 dummy block.. Look like it clear ATI powerglide clear perfect at the firewall and tunnel..... Btw: sombody asked me in the past about the crank centerline on my 65 valiant sb, i know this is not the right way to do it, but its just a rought measure to give an idea, iam sure is lower then 13 inches... 8129443-image.jpg (126 downloads)

Re: Gettin the 65 valiant ready for paint [Re: SB449VALIANT] #1614271 04/30/14 08:06 PM 04/30/14 08:06 PM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT OP pro stock
SB449VALIANT OP pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	#2 8129446-image.jpg (109 downloads)

Re: Gettin the 65 valiant ready for paint [Re: SB449VALIANT] #1614272 04/30/14 08:08 PM 04/30/14 08:08 PM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT OP pro stock
SB449VALIANT OP pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	#3 8129449-image.jpg (107 downloads)

Re: Gettin the 65 valiant ready for paint [Re: SB449VALIANT] #1614273 04/30/14 08:09 PM 04/30/14 08:09 PM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT OP pro stock
SB449VALIANT OP pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	#4 8129451-image.jpg (102 downloads)

Re: Gettin the 65 valiant ready for paint [Re: SB449VALIANT] #1614274 04/30/14 08:10 PM 04/30/14 08:10 PM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT OP pro stock
SB449VALIANT OP pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	#5 8129457-image.jpg (91 downloads)

Re: Gettin the 65 valiant ready for paint [Re: SB449VALIANT] #1614275 04/30/14 08:11 PM 04/30/14 08:11 PM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT OP pro stock
SB449VALIANT OP pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	Last 8129460-image.jpg (98 downloads)

Re: Gettin the 65 valiant ready for paint [Re: SB449VALIANT] #1614276 04/30/14 08:31 PM 04/30/14 08:31 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Stick a dist in it... its gonna be close to the fire wall... and it'll be lower than the 13" when you have all the weight on it

Re: Gettin the 65 valiant ready for paint [Re: MR_P_BODY] #1614277 04/30/14 09:49 PM 04/30/14 09:49 PM
Joined: Feb 2004 Posts: 34,909 S.E. South Dakota ! bigdad Still Posting A Lot
bigdad Still Posting A Lot Joined: Feb 2004 Posts: 34,909 S.E. South Dakota !	I for one, can't wait to see it back out 8129571-gilsval.JPG (103 downloads)

Re: Gettin the 65 valiant ready for paint [Re: bigdad] #1614278 05/01/14 02:38 AM 05/01/14 02:38 AM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT OP pro stock
SB449VALIANT OP pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	Thanks Daryl...project finally coming together....

Re: Gettin the 65 valiant ready for paint [Re: MR_P_BODY] #1614279 05/01/14 02:45 AM 05/01/14 02:45 AM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT OP pro stock
SB449VALIANT OP pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	Quote: Stick a dist in it... its gonna be close to the fire wall... and it'll be lower than the 13" when you have all the weight on it Thanks Mr P. It fits but it just not righ, not enough clearence....

Re: Gettin the 65 valiant ready for paint [Re: SB449VALIANT] #1614280 05/01/14 11:00 AM 05/01/14 11:00 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Quote: Quote: Stick a dist in it... its gonna be close to the fire wall... and it'll be lower than the 13" when you have all the weight on it Thanks Mr P. It fits but it just not righ, not enough clearence.... When I built the Rampage I did the same thing... when I measured the dist to the fire wall it cleared but I forgot the material thickness.. it was .062 alum so I had to put a small radius in the alum, .062 deep

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1