|
Re: spraying on the tranbrake
[Re: hvyweight]
#1614044
04/30/14 12:53 AM
04/30/14 12:53 AM
|
Joined: Feb 2004
Posts: 6,257
acworth / N. georgia - south e...
cheapstreetdustr
master
|
master
Joined: Feb 2004
Posts: 6,257
acworth / N. georgia - south e...
|
depending on your hp with the shot on...
hp is hp.. as long as you have the trans and converter to handle power..i dont see any reason you couldnt spray while on the brake..
ive hit mine with a .63 (150hp)pill. while on the brake...(i realise thats not all that much)when my tires are good and track is good it usually stands the front tires up the most..
but its not consistant for me..mostly because it messes up my normal stage and launch routine .
365" Iron J heads,,3480lbs best 1.39 60ft on SS springs.10.54,124 mph ...6.67 1/8th et.average 60fts 1.46 w/ small cam &.063 no2 pill tagged & insured
[image][/image]
|
|
|
Re: spraying on the tranbrake
[Re: bigtimeauto]
#1614046
04/30/14 01:18 AM
04/30/14 01:18 AM
|
Joined: Feb 2010
Posts: 190
Winterpeg, Canada
hvyweight
OP
member
|
OP
member
Joined: Feb 2010
Posts: 190
Winterpeg, Canada
|
Quote:
why???? I see lots of converters in your future
not to sound like a smart azz but why would you say that? Nitrous TS spray on the convertor don't they?
|
|
|
Re: spraying on the tranbrake
[Re: hvyweight]
#1614048
04/30/14 01:32 AM
04/30/14 01:32 AM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Quote:
why???? I see lots of converters in your future
not to sound like a smart azz but why would you say that? Nitrous TS spray on the convertor don't they?
Whats your 60' now with what kind of power... I dont
spray but it makes a TON of torque and with any amount
it would blow through a conv... all the guys I know
that spray pretty hard hit it at the release and ramp
it in for what the track will take... you have to
remember that while your on the line the conv is
making twice the torque and drops as soon as you
start rolling
|
|
|
Re: spraying on the tranbrake
[Re: dirty magnum]
#1614053
04/30/14 02:24 AM
04/30/14 02:24 AM
|
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
did it all the time on micro switch , and 2 way button sprayed 500 to 600 worked great
You hit 500-600 of spray while sitting on the trans
brake... am I hearing you correct
|
|
|
Re: spraying on the tranbrake
[Re: MR_P_BODY]
#1614055
04/30/14 03:03 AM
04/30/14 03:03 AM
|
Joined: Jan 2003
Posts: 4,448
Phoenix, AZ
MoparBilly
master
|
master
Joined: Jan 2003
Posts: 4,448
Phoenix, AZ
|
Been there, done it, wouldn't recommend it. 60ft improved from 1.30 to 1.28, but it was pretty much the same by the 330ft.! 1.76 glide 9" spragless converter, mild 440 in a 2850 lb. car. 250 at the hit, and occasionally before, then another 175 at 100ft out.
"Livin' in a powder keg and givin' off sparks"
4 Street cars, 5 Race engines
|
|
|
Re: spraying on the tranbrake
[Re: bigtimeauto]
#1614056
04/30/14 10:18 AM
04/30/14 10:18 AM
|
Joined: Jan 2003
Posts: 13,365
Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,365
Marion, South Carolina [><]
|
Quote:
There is absolutely no reason to do this, nor do I know of anybody that does.
CHIP
'70 hemicuda, 575" Hemi, 727, Dana 60
'69 road runner, 440-6, 18 spline 4 speed, Dana 60
'71 Demon, 340, low gear 904, 8.75
'73 Chrysler New Yorker, 440, 727, 8.75
'90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt
'06 GMC 2500HD LBZ Duramax
|
|
|
Re: spraying on the tranbrake
[Re: SB412DUSTER]
#1614058
04/30/14 01:51 PM
04/30/14 01:51 PM
|
Joined: Feb 2014
Posts: 655
Huntsville, AL
Airwoofer
mopar
|
mopar
Joined: Feb 2014
Posts: 655
Huntsville, AL
|
Quote:
If you are going to spray it on the brake I hope you don't use a 2 step if so watch out hood and carb 
Yeah especially if the engine stalls after the second stage timer has started. 
My car is set up for the first stage to start at the transbrake release and the second to start some time after the transbrake is released. Somehow up at STL this happened to Mike Robbins in (now) my Demon when the engine quit as he was staging and he hit the starter...
|
|
|
Re: spraying on the tranbrake
[Re: hvyweight]
#1614059
04/30/14 02:29 PM
04/30/14 02:29 PM
|
Joined: Nov 2004
Posts: 6,890
North Alabama
Monte_Smith
master
|
master
Joined: Nov 2004
Posts: 6,890
North Alabama
|
Quote:
Quote:
why???? I see lots of converters in your future
not to sound like a smart azz but why would you say that? Nitrous TS spray on the convertor don't they?
NO............I tune several TS and TD cars. Nobody I know of sprays while on the brake. Why would you?.....If your car won't 60ft where you want it, THIS is not going to fix it. Something is not right in the setup if it won't 60ft
Monte
|
|
|
|
|
ofdadscan1.jpg){kind=link}