can anyone tell me the measurements for the hood and trunklid stripes on a 67 gtx that I need to paint on? Also are the stripes gloss or semi they are going black Thanks

would also need the sixe of the stripe. HELP HELP

Try Dave Patik of Car Graphix. He's the restoration advisor for the Winged Warriors/ National B-Body Owners Assoc. & if he doesn't have the info he can probably point you in the direction of someone who does.

His email is CarGraphix@aol.com, phone # is 850-878-1450

to Dave

The fronts are centered over the high beams, width is 4". I measured my original stripes as 37-1/4 between the fronts. The rears are centered over the backup lights.

4" wide gloss colors only, painted on. They are centered on the hood scoops, they go down below the grille on the filler panel also. Rears are not parallel to the fronts, they are centered over the backup light and go to the window trim, they are not parallel to the edge of the tunk lid. No pinstripes on either side of them either. These were an option, not standard equipment, about 25% of the cars came with them.

If the hood stripes are parallel & the trunk stripes are parallel then they are parallel to each other.

If they do not share the same center to center dimension that would be a different issue: alignment - "not in-line".

"Sport Stripes" were a $30.65 OPTION on a '67 GTX

I recently sold a original paint survivor GTX and the stripes on the front stopped at the hood and did not go below the grill

1 more