I a long time ago tossed my seatbelts, not thinking that one day I would put a full interior back into the car.

Now that i am, I find myself looking for belts.

I have found a set, but it is from a bench seat.

I am putting in factory buckets, will these be different?

If different how?

Thanks,

Bryan

the buckles attached to tranny hump are diff but I think rest are the same

You will probably have an extra belt for the front bench seat's center passenger, but that's not hard to leave out. You may have to use shorter length seat belt bolts with one less belt, though.

What make/model/year Mopar?

I have a 75' Dodge Dart Sport, so it has the over the shoulder deal coming from the roof panel.

For years I had just a pair of racing buckets with the 5 point, that I only used the lap belt part in the street.

Now that the car is being de-raced, I have to find all of this stuff again ( read that BUY the stuff)

Bryan

The inboard belts attached to the hump have a 90 degree twist to the hard plastic sheath.

don't think there is a difference, inboard one that goes on the hump will have the extra center belt and the shoulder belt if it had it