Wire Harness, Year One (M&H Wire)
#1498069
09/08/13 02:50 AM
09/08/13 02:50 AM
|
Joined: Oct 2011
Posts: 768 Dry Heat AZ
AAR#2
OP
super stock
|
OP
super stock
Joined: Oct 2011
Posts: 768
Dry Heat AZ
|
Thought I would post a good story since they seem to be far to rare in the hobby. I purchased new wires through Year One, these wires are produced by M&H, but M&H cannot sell direct due to a exclusive arrangement with Year One, linked to Year Ones investment in MOPAR research/tooling investment. Received the wires and compared to my original and was pleased to see that everything would work but there were some differences with some connector colors, socket styles, the occasional "additional wire" and a gauge thickness. No show stoppers, many of the items I intended to correct myself, but a good quality, plug and play harness. I documented all the differences and sent a Power Point presentation to M&H, looking to see if they would be able to provide correct pieces for me to incorporate into my harness. I was pleased to see that M&H offered me the option to send in my harnesses, old and new, and they would make the corrections. The wires they returned to me are outstanding, and a ringer to my originals. Special shout out to M&H for going the extra mile
|
|
|
Re: Wire Harness, Year One (M&H Wire)
[Re: AAR#2]
#1498072
09/08/13 12:15 PM
09/08/13 12:15 PM
|
Joined: Jan 2003
Posts: 3,967 S.I. N.Y.
1MYTGTX
master
|
master
Joined: Jan 2003
Posts: 3,967
S.I. N.Y.
|
Good to hear. I used the M & H harness on my 69 Charger with great results. Installed it while dash was in the car though. Your dash looks factory fresh down to the little clips! Great job
1MYTGTX
|
|
|
Re: Wire Harness, Year One (M&H Wire)
[Re: floridian]
#1498076
09/09/13 09:52 AM
09/09/13 09:52 AM
|
Joined: Apr 2011
Posts: 315 Ontario, Canada
RealWing
enthusiast
|
enthusiast
Joined: Apr 2011
Posts: 315
Ontario, Canada
|
I found a couple of wrong connectors on a rear harness for my '69 Cuda project. M&H got back to me promptly and quickly shipped the correct parts and I did the (easy) repairs myself. Very impressed.
1970 Superbird 440-6bbl, auto 1969 Barracuda 340-4bbl, FB Formula S auto 1969 Barracuda 6.1 L Hemi, 5 speed, Convertible 2022 Can Am Spyder RTL
|
|
|
Re: Wire Harness, Year One (M&H Wire)
[Re: RealWing]
#1498077
09/09/13 11:37 AM
09/09/13 11:37 AM
|
Joined: Aug 2003
Posts: 8,828 Houston, Tx
hemi68charger
master
|
master
Joined: Aug 2003
Posts: 8,828
Houston, Tx
|
I am in the process of completing two cars at home for friend's of mine. Both cars have ALL new M&H harnesses. I only found one isiue, but was easily corrected. I am very pleased with their products.
Cheers and thanks for the "good vibe" post.......
Troy
TroyHouston Mopar Connection Club'69 Charger Daytona 440 - auto - 4.10 Dana (now with 426 hemi) '69 Charger 500 440 - 4speed - 3.54 Dana '70 Road Runner 383 - 4speed - a/c (now with 440)
|
|
|
|
|