15x10 wheels on a ebody - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 15x10 wheels on a ebody

Print Thread

15x10 wheels on a ebody #1480305 08/05/13 09:34 PM 08/05/13 09:34 PM
Joined: Mar 2008 Posts: 62 middle tennessee 7 71RTC OP member
71RTC OP member 7 Joined: Mar 2008 Posts: 62 middle tennessee	has anyone run a 15x10 with 5" backspacing on a e body, will be running a 28x12.5 qtp?

Re: 15x10 wheels on a ebody [Re: 71RTC] #1480306 08/05/13 09:58 PM 08/05/13 09:58 PM
Joined: Apr 2005 Posts: 1,505 TN S SCATPACK 1 pro stock
SCATPACK 1 pro stock S Joined: Apr 2005 Posts: 1,505 TN	I have them on mine with a 66 b body rear and offset spring hangers. Has good clearance on both inside and outside. 5" back spacing is just right on mine Old Geezer Racing

Re: 15x10 wheels on a ebody [Re: SCATPACK 1] #1480307 08/05/13 10:29 PM 08/05/13 10:29 PM
Joined: Mar 2008 Posts: 62 middle tennessee 7 71RTC OP member
71RTC OP member 7 Joined: Mar 2008 Posts: 62 middle tennessee	thanks, bout to order some beadlock wheels and im nervous that they wont fit!! I was running a 8" wheel with 4.5 backspacing and I fit a 295/60 dragradial, had to clearance the springs. hope these will fit! 7803861-033.JPG (71 downloads) Last edited by 71RTC; 08/05/13 10:43 PM.

Re: 15x10 wheels on a ebody [Re: 71RTC] #1480308 08/05/13 10:41 PM 08/05/13 10:41 PM
Joined: Aug 2009 Posts: 2,047 Mooresburg, Tn ' '72CudaRacer top fuel
'72CudaRacer top fuel ' Joined: Aug 2009 Posts: 2,047 Mooresburg, Tn	Mine has 10" wheels on it with 11.5x29.5 Micky Thompson slicks. I also run a late 60's Dana out of a Road Runner. I have offset front spring hangers, but I also straightened the springs to be parallel with the center line of the car. No problems here. I did have to turn the top of the wheel well "lip" up to gain clearance there. Good luck with yours, Brian

Re: 15x10 wheels on a ebody [Re: '72CudaRacer] #1480309 08/05/13 10:56 PM 08/05/13 10:56 PM
Joined: Mar 2008 Posts: 62 middle tennessee 7 71RTC OP member
71RTC OP member 7 Joined: Mar 2008 Posts: 62 middle tennessee	what track do these Tennessee guys run at? 7803906-033(1024x681)(800x532).jpg (64 downloads)

Re: 15x10 wheels on a ebody [Re: 71RTC] #1480310 08/05/13 11:01 PM 08/05/13 11:01 PM
Joined: Jan 2003 Posts: 8,143 New Mexico UCUDANT Troll Hunter
UCUDANT Troll Hunter Joined: Jan 2003 Posts: 8,143 New Mexico	I have 15x10" wheels on my Cuda but I have 6" of backspace ...check this out http://www.moparts.org/Tech/Archive/rearsusp/12.html one of the moderators added the 5" backspace info when they placed the post in the tech archives.

Re: 15x10 wheels on a ebody [Re: 71RTC] #1480311 08/05/13 11:02 PM 08/05/13 11:02 PM
Joined: May 2004 Posts: 1,522 Ste-Sophie, Quebec, Canada W Wedgeman pro stock
Wedgeman pro stock W Joined: May 2004 Posts: 1,522 Ste-Sophie, Quebec, Canada	yes I run 15X10 on my 67 cuda..5 in back space It's a tight fit...really tight....I had a to center the axle with the panhard bar ...and massage the front wheel well a bit...but it fits ! Dan

Re: 15x10 wheels on a ebody [Re: 71RTC] #1480312 08/05/13 11:29 PM 08/05/13 11:29 PM
Joined: Aug 2009 Posts: 2,047 Mooresburg, Tn ' '72CudaRacer top fuel
'72CudaRacer top fuel ' Joined: Aug 2009 Posts: 2,047 Mooresburg, Tn	Quote: what track do these Tennessee guys run at? Nice car Koby. I run at Bristol mostly. Sometimes I go to Knoxville, Newport or London,Ky. I only live about 11 miles from Cherokee (in Rogersville, Tn). I lived in Murfreesboro until 2006. I still make it back to Music City or Middle Tenn raceway once in a while. Brian Dunnigan

Re: 15x10 wheels on a ebody [Re: '72CudaRacer] #1480313 08/05/13 11:48 PM 08/05/13 11:48 PM
Joined: Mar 2008 Posts: 62 middle tennessee 7 71RTC OP member
71RTC OP member 7 Joined: Mar 2008 Posts: 62 middle tennessee	cool, been wanting to go to bristol is there a mopar race going to there soon?

Re: 15x10 wheels on a ebody [Re: 71RTC] #1480314 08/06/13 12:12 AM 08/06/13 12:12 AM
Joined: Aug 2009 Posts: 2,047 Mooresburg, Tn ' '72CudaRacer top fuel
'72CudaRacer top fuel ' Joined: Aug 2009 Posts: 2,047 Mooresburg, Tn	Quote: cool, been wanting to go to bristol is there a mopar race going to there soon? Yes. Fri and Sat Aug 30-31 I think fri is car show, swap meet and test and tune. Sat all of that plus racing all day. They've combined the Ford show and Mopar show in the same weekend, but other than the all run race sat afternoon, the rest of the program is seperated by makes of cars. I run the 1/8 mile footbrake class and the 1/4 mile sportsman class, so I'm looking foreward to racing in three races on sat. Be a long, fun day if I can go some rounds! Where in Middle Tn are you located? Brian

Re: 15x10 wheels on a ebody [Re: '72CudaRacer] #1480315 08/06/13 12:28 AM 08/06/13 12:28 AM
Joined: Mar 2008 Posts: 62 middle tennessee 7 71RTC OP member
71RTC OP member 7 Joined: Mar 2008 Posts: 62 middle tennessee	chapel hill, bout 30 min from Murfreesboro. dang that race is too close to rod run cant make two trips that close together!

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1