SFI bell housing - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech SFI bell housing

Print Thread

SFI bell housing #1444989 05/30/13 09:33 PM 05/30/13 09:33 PM
Joined: Mar 2003 Posts: 753 San Diego, CA B brktracr OP super street
brktracr OP super street B Joined: Mar 2003 Posts: 753 San Diego, CA	Looking to go to the dark side and put a glide in my sled. I'm looking for a SFI bell housing. JW hasn't made any BBM to powerglide since December of 2012, the latest on availability is July. I was told not to hold my breath for that to happen. Are there any other BBM to powerglide bell housing available? 1.298 60 ft 6.001 1/8 mile 114 mph 9.52 1/4 mile 140.87 mph @ 3110 lbs

Re: SFI bell housing [Re: brktracr] #1444990 05/30/13 11:06 PM 05/30/13 11:06 PM
Joined: Mar 2007 Posts: 3,300 Northern Indiana Dunnuck Racing master
Dunnuck Racing master Joined: Mar 2007 Posts: 3,300 Northern Indiana	TCI and QuickTime both make them. Keith www.dunnuckracing.com

Re: SFI bell housing [Re: brktracr] #1444991 05/31/13 02:42 AM 05/31/13 02:42 AM
Joined: Jan 2003 Posts: 296 Ontario Canada H Hutch enthusiast
Hutch enthusiast H Joined: Jan 2003 Posts: 296 Ontario Canada	If the budget will allow , do yourself a favor and get a Reid 2 pc case with their chrysler bell. Lighter and much nicer alignment. Hutch

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1