|
ANY HP GUESS ON THIS 605 HEMI
#1421437
04/17/13 08:41 PM
04/17/13 08:41 PM
|
Joined: Jan 2006
Posts: 281 NEW HAMPSHIRE AND MAINE
BIGSTROKER
OP
enthusiast
|
OP
enthusiast
Joined: Jan 2006
Posts: 281
NEW HAMPSHIRE AND MAINE
|
what kind of power do you guys think my hemi will make 605 inches stage V heads that flow an honest 435 on int dual 780's on a cross ram 258@50 and 650 lift solid roller 11 to 1 2 1/4 tti's and all the usual top shelf stuff
|
|
|
Re: ANY HP GUESS ON THIS 605 HEMI
[Re: BIGSTROKER]
#1421438
04/17/13 09:46 PM
04/17/13 09:46 PM
|
Joined: Jan 2003
Posts: 6,392 nielsville, minn.
quickd100
master
|
master
Joined: Jan 2003
Posts: 6,392
nielsville, minn.
|
Ditch the crossram and find a tunnel ram, the cam is to small too. My 605 has small heads (386cfm@.700), 10.4-1 compression, the cam is a Bullet solid roller, .767/.676, 288/292@.050, 113 center installed at 111. It made [Email]852.8hp@5782rpm[/Email] and [Email]818ftlbs.@4818rpm.[/Email] I guarentee you'll love the torque it makes.Dave
|
|
|
Re: ANY HP GUESS ON THIS 605 HEMI
[Re: BIGSTROKER]
#1421439
04/18/13 08:42 PM
04/18/13 08:42 PM
|
Joined: Jan 2010
Posts: 311 Kingsville, Md
grncpe
enthusiast
|
enthusiast
Joined: Jan 2010
Posts: 311
Kingsville, Md
|
Hard to say,you have a large cubic inch motor,small cam,& large tube header, & a good head.I think it will be out of steam early.Peak H.P. will prob. be around 5500rpm.Large tube header will hurt torque, but the cam u have will prob.make up for it.Just from what I have seen & read Ill say around 760 hp.740 tq. thats just my guess. I have a 588 with 12 to 1,mopar heads that flow 412 @ .800 & really good #'s lower.Racer brown solid roller 760 intake 740 ex.284 @.50,stage 5 inline 2 fours,800 cfm afb's,& 2&1/8 tti headers.I made 836 @ 6700, 730tq @ 5200.
|
|
|
Re: ANY HP GUESS ON THIS 605 HEMI
[Re: LAD 524]
#1421441
04/19/13 09:32 AM
04/19/13 09:32 AM
|
Joined: Dec 2005
Posts: 293 Kansas City Metro
mbogina
enthusiast
|
enthusiast
Joined: Dec 2005
Posts: 293
Kansas City Metro
|
I agree w others here in that the cam is too small. Our basic 572 NSS motor, 12 to 1, head flow 415, cam in the 280's, +.700 lift, Mopar Xram, 2 780 Holleys, 900 HP at 64/6500, 800+ torque at around 50/5200
Be a Rebel- Break the Laws of Physics!
|
|
|
|
|
|