|
|
|
Re: max wedge B1BS heads max cubic inch
[Re: HotRodDave]
#1408195
03/26/13 02:52 PM
03/26/13 02:52 PM
|
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
Von
master
|
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
Quote:
As for the B1BS it is a big head
Compared to what?
I have a set of BS heads...IMO they arent what I would call a "Big" head. They are barely above a CNC'dRPM, CNC'd Stealth, etc.
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
Re: max wedge B1BS heads max cubic inch
[Re: Von]
#1408196
03/26/13 03:15 PM
03/26/13 03:15 PM
|
Joined: Nov 2003
Posts: 1,664
North Sweden
RT540
top fuel
|
top fuel
Joined: Nov 2003
Posts: 1,664
North Sweden
|
Motor was built in -99, not in my ownership. Heads are now on another motor, and my 540 will have B1originals, not because I didnīt like it, but the go faster... MW Indy 440-1 intake 1050-9375 carb Wiseco 13:1 flat tops BME 426 7.15 rods Crane superstock grind Int 0.707" Exh 0.670 276° dur at 050 4.50 bore, 4.25 stroke Dry sump oil 
|
|
|
Re: max wedge B1BS heads max cubic inch
[Re: RT540]
#1408198
03/26/13 03:31 PM
03/26/13 03:31 PM
|
Joined: Jan 2012
Posts: 2,652
Stuttgart, Arkansas
rickseeman
master
|
master
Joined: Jan 2012
Posts: 2,652
Stuttgart, Arkansas
|
Nice. Within 1% of max power at 5900. 800 hp and no need to rev it high. My buddy has B1BS's and I like them.
2011 Drag Pak Challenger
|
|
|
|
|
|
|
Both the SR and the B1-BS have the standard rocker arms, pushrod pinch and intake valve spacing like the stock 361/440 have so that is probally the limiting factor on how good you can get them to flow 