T&D rockers-- INDY 360-2 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech T&D rockers-- INDY 360-2

Print Thread

Page 1 of 2

1

2

T&D rockers-- INDY 360-2 #1402251 03/13/13 11:38 PM 03/13/13 11:38 PM
Joined: Nov 2006 Posts: 1,090 north cakalaky I instigator OP super stock
instigator OP super stock I Joined: Nov 2006 Posts: 1,090 north cakalaky	Anyone know if any machine work needs to be done to Indy 360-2 heads for T&D rockers to work...Do the T&D rockers have smaller shafts...any details would be great....I'm somewhere around 220psi closed/ high 400's open on a smith machine lifters/solid flat tappet...want to put some street miles on the motor and may worry to much with the Indy rockers.....What do yall think??? 65 Barracuda All aluminum Indy HEMI with some boost! COMING TO A TRACK NEAR YOU!

Re: T&D rockers-- INDY 360-2 [Re: instigator] #1402252 03/13/13 11:59 PM 03/13/13 11:59 PM
Joined: Feb 2007 Posts: 1,025 Las Vegas, NV dodgeboy11 super stock
dodgeboy11 super stock Joined: Feb 2007 Posts: 1,025 Las Vegas, NV	The rockers I saw on Indy sb heads used smaller single shaft with larger diameter collars where they meet the pedestals on the heads

Re: T&D rockers-- INDY 360-2 [Re: instigator] #1402253 03/14/13 12:02 AM 03/14/13 12:02 AM
Joined: Jan 2008 Posts: 795 Glendale Az D Darryls-Demon super stock
Darryls-Demon super stock D Joined: Jan 2008 Posts: 795 Glendale Az	If you are going to use this style T@D set up you need to have the pedistials milled off, it is a very nice setup I wish my BB had this setup also. 7625254-IMG_1681.JPG (705 downloads)

Re: T&D rockers-- INDY 360-2 [Re: Darryls-Demon] #1402254 03/14/13 12:34 AM 03/14/13 12:34 AM
Joined: Nov 2006 Posts: 1,090 north cakalaky I instigator OP super stock
instigator OP super stock I Joined: Nov 2006 Posts: 1,090 north cakalaky	The T&D 8120 rockers for the indy heads seem to be single shaft....maybe they use some form of mounting bushing to run a smaller diameter shaft so they can have a bearing in the rockers....anyone know...if not I'll give them a ring in the morning. 65 Barracuda All aluminum Indy HEMI with some boost! COMING TO A TRACK NEAR YOU!

Re: T&D rockers-- INDY 360-2 [Re: instigator] #1402255 03/14/13 12:48 AM 03/14/13 12:48 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Quote: The T&D 8120 rockers for the indy heads seem to be single shaft....maybe they use some form of mounting bushing to run a smaller diameter shaft so they can have a bearing in the rockers....anyone know...if not I'll give them a ring in the morning. The single shaft ones do have a smaller diameter shaft but have a bushing over the shaft where they mount to the head

Re: T&D rockers-- INDY 360-2 [Re: MR_P_BODY] #1402256 03/14/13 12:50 AM 03/14/13 12:50 AM
Joined: Nov 2006 Posts: 1,090 north cakalaky I instigator OP super stock
instigator OP super stock I Joined: Nov 2006 Posts: 1,090 north cakalaky	Quote: Quote: The T&D 8120 rockers for the indy heads seem to be single shaft....maybe they use some form of mounting bushing to run a smaller diameter shaft so they can have a bearing in the rockers....anyone know...if not I'll give them a ring in the morning. The single shaft ones do have a smaller diameter shaft but have a bushing over the shaft where they mount to the head so head should not need any modifications????? thanks MR. P.......I pitty the fool! 65 Barracuda All aluminum Indy HEMI with some boost! COMING TO A TRACK NEAR YOU!

Re: T&D rockers-- INDY 360-2 [Re: instigator] #1402257 03/14/13 12:53 AM 03/14/13 12:53 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	so head should not need any modifications????? thanks MR. P.......I pitty the fool! Only if it needs to go up or down to correct geometry

Re: T&D rockers-- INDY 360-2 [Re: dodgeboy11] #1402258 03/14/13 12:58 AM 03/14/13 12:58 AM
Joined: Nov 2006 Posts: 1,090 north cakalaky I instigator OP super stock
instigator OP super stock I Joined: Nov 2006 Posts: 1,090 north cakalaky	Quote: The rockers I saw on Indy sb heads used smaller single shaft with larger diameter collars where they meet the pedestals on the heads Sorry, I din't follow your post...you answered my later question....thanks also! anyone know a good place to order them up. 65 Barracuda All aluminum Indy HEMI with some boost! COMING TO A TRACK NEAR YOU!

Re: T&D rockers-- INDY 360-2 [Re: instigator] #1402259 03/14/13 02:34 AM 03/14/13 02:34 AM
Joined: Feb 2005 Posts: 982 western pennsylvania b1dartsport super stock
b1dartsport super stock Joined: Feb 2005 Posts: 982 western pennsylvania	These rockers need no mods and bolt up in 5 min. I have a new set and a new set of heads. I will bolt one up and take some pics. 7625389-015(Small).JPG (542 downloads)

Re: T&D rockers-- INDY 360-2 [Re: b1dartsport] #1402260 03/14/13 02:39 AM 03/14/13 02:39 AM
Joined: Feb 2005 Posts: 982 western pennsylvania b1dartsport super stock
b1dartsport super stock Joined: Feb 2005 Posts: 982 western pennsylvania	I ran the exact setup on my old motor,about 200 street miles and 20 passes no problems. Were like new when I took it apart. Springs were bigger than yours. Cam was .672 lift 260/266 at .050. 7625390-017(Small).JPG (453 downloads)

Re: T&D rockers-- INDY 360-2 [Re: b1dartsport] #1402261 03/14/13 02:42 AM 03/14/13 02:42 AM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT pro stock
SB449VALIANT pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	T&D on 360-1... Needed some mill off the pedestals 7625392-image.jpg (287 downloads)

Re: T&D rockers-- INDY 360-2 [Re: SB449VALIANT] #1402262 03/14/13 02:42 AM 03/14/13 02:42 AM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT pro stock
SB449VALIANT pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	2 7625394-image.jpg (365 downloads)

Re: T&D rockers-- INDY 360-2 [Re: b1dartsport] #1402263 03/14/13 02:43 AM 03/14/13 02:43 AM
Joined: Feb 2005 Posts: 982 western pennsylvania b1dartsport super stock
b1dartsport super stock Joined: Feb 2005 Posts: 982 western pennsylvania	These were about the only thing on my set up I did not have to modify. 7625395-016(Small).JPG (406 downloads)

Re: T&D rockers-- INDY 360-2 [Re: SB449VALIANT] #1402264 03/14/13 02:43 AM 03/14/13 02:43 AM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT pro stock
SB449VALIANT pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	3 7625396-image.jpg (268 downloads)

Re: T&D rockers-- INDY 360-2 [Re: SB449VALIANT] #1402265 03/14/13 02:44 AM 03/14/13 02:44 AM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT pro stock
SB449VALIANT pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	4 7625397-image.jpg (205 downloads)

Re: T&D rockers-- INDY 360-2 [Re: SB449VALIANT] #1402266 03/14/13 02:45 AM 03/14/13 02:45 AM
Joined: Feb 2005 Posts: 1,418 Mcallen, TX SB449VALIANT pro stock
SB449VALIANT pro stock Joined: Feb 2005 Posts: 1,418 Mcallen, TX	Last 7625398-image.jpg (201 downloads)

Re: T&D rockers-- INDY 360-2 [Re: SB449VALIANT] #1402267 03/14/13 02:49 AM 03/14/13 02:49 AM
Joined: Nov 2006 Posts: 1,090 north cakalaky I instigator OP super stock
instigator OP super stock I Joined: Nov 2006 Posts: 1,090 north cakalaky	so they seem to offer a couple styles....standard single shaft or mini shafts on a steel machined plate...the 2nd way definetly seems like quite a bit of work.........so B1, what form of bushing/bearing are on the single shaft units?..do they oil through the head? 65 Barracuda All aluminum Indy HEMI with some boost! COMING TO A TRACK NEAR YOU!

Re: T&D rockers-- INDY 360-2 [Re: b1dartsport] #1402268 03/14/13 02:54 AM 03/14/13 02:54 AM
Joined: Feb 2005 Posts: 982 western pennsylvania b1dartsport super stock
b1dartsport super stock Joined: Feb 2005 Posts: 982 western pennsylvania	SB449 I think my rockers are different than yours. I got these from Bill Richardson at RAM racing and I was told that these are made specifically for Indy 360 heads. 7625406-020(Small).JPG (439 downloads)

Re: T&D rockers-- INDY 360-2 [Re: instigator] #1402269 03/14/13 03:02 AM 03/14/13 03:02 AM
Joined: Feb 2005 Posts: 982 western pennsylvania b1dartsport super stock
b1dartsport super stock Joined: Feb 2005 Posts: 982 western pennsylvania	Quote: so they seem to offer a couple styles....standard single shaft or mini shafts on a steel machined plate...the 2nd way definetly seems like quite a bit of work.........so B1, what form of bushing/bearing are on the single shaft units?..do they oil through the head? The set I have oil through the head,but I was told you could order pushrod oiling no change in price or fitment. They come completely assembled,like Ersons, I have never taken one off the shaft. I am not sure if they are bushed or have roller bearings. 7625412-014(Small).JPG (353 downloads)

Re: T&D rockers-- INDY 360-2 [Re: b1dartsport] #1402270 03/14/13 03:13 AM 03/14/13 03:13 AM
Joined: Nov 2006 Posts: 1,090 north cakalaky I instigator OP super stock
instigator OP super stock I Joined: Nov 2006 Posts: 1,090 north cakalaky	Thanks for the info. 65 Barracuda All aluminum Indy HEMI with some boost! COMING TO A TRACK NEAR YOU!

Page 1 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1