Wondering if anyone can help me.
My wife has a Sebring that started having problems today.
She took it to Autozone and had them hook it up the computer.
she had 2 codes P03040 which says Cam shaft sensor defective
and P13191-timing belt or chain stretched or jumped
Defective CMP sensor.
Tried to find the cam shaft sensor online. Could not find one, so I called Autozone and the guy tells me that her car does not have a cam shaft sensor. This is uncharted territory for me. Like to have the advice of the more knowledgeable brethren before I go and throw a lot of money on this car. Any advice would be helpful.

Best to get to a dealer to determine. Autozone is good for basic stuff but I would have a qualified professional look it over.

About a year ago, my 2001 Sebring LXI started running erratic. It also had a code for camshaft position sensor.

I bought one from Advance Auto ($25?) and installed it myself. I bit hard to reach and about an hour to do.

Stan

How many miles and has the timing belt been changed?

What year Sebring and what engine?

163000 and as far as I know the timing belt has not been changed

2000 2.7 v6

Google is your friend

2.7 should be a chain. Better get it checked they have been known to have issues.

Camshaft sensor from Advance Auto

Yes it has a cam sensor. Have you had some engine noise?? I'm guessing you have an extended crank before it starts??does it run ok after started??If you just have a long crank,cam sensor might fix it.if it runs funny,low power,timing chain probably jumped a tooth,especially if there was/is engine noise. chain jump= lot's of money to fix.parts and time.multiple chains,guides,tensioners,water pump. alittle more info on what's it doing would help.