Re: Calling on 70 Barracuda Gran Coupe Owners
[Re: cudaized]
#1382477
02/06/13 06:25 PM
02/06/13 06:25 PM
|
Joined: Jan 2005
Posts: 147 Alberta, Canada eh!
70Cudha
OP
member
|
OP
member
Joined: Jan 2005
Posts: 147
Alberta, Canada eh!
|
I looked at the first photo last night but couldn't get a close enough view. That was my guess as it makes the most sense they would be less likely to trap dirt, mud etc. if installed down however, I would rather risk sounding stupid than installing them incorrectly and removing all doubt. Thx a bunch.
1970 EV2 Barracuda Hardtop 1970 FE5 Barracuda Gran Coupe Convertible 1969 B5 Dart GTS 383 1968 TT1 Barracuda Convertible 1997 Ram SS/T 2008 3500 Ram Diesel
|
|
|
Re: Calling on 70 Barracuda Gran Coupe Owners
[Re: cudaized]
#1382480
02/06/13 06:48 PM
02/06/13 06:48 PM
|
Joined: Jan 2005
Posts: 147 Alberta, Canada eh!
70Cudha
OP
member
|
OP
member
Joined: Jan 2005
Posts: 147
Alberta, Canada eh!
|
Unfortunately my painter filled in the clip holes during body work and paint. I did mark each piece as either left or right side.
I took hundreds of photos during disassembly but for some reason the rocker trim removal wasn't documented.
Never can take too many photo's!
1970 EV2 Barracuda Hardtop 1970 FE5 Barracuda Gran Coupe Convertible 1969 B5 Dart GTS 383 1968 TT1 Barracuda Convertible 1997 Ram SS/T 2008 3500 Ram Diesel
|
|
|
Re: Calling on 70 Barracuda Gran Coupe Owners
[Re: 70Cudha]
#1382481
02/06/13 07:42 PM
02/06/13 07:42 PM
|
Joined: Oct 2003
Posts: 21,345 Marysville, O-H-I-O
70Cuda383
Too Many Posts
|
Too Many Posts
Joined: Oct 2003
Posts: 21,345
Marysville, O-H-I-O
|
Are these standard on all gran coupes? My car didn't have them when I got it, but it had also been through 2 color changes in its life
**Photobucket sucks**
|
|
|
Re: Calling on 70 Barracuda Gran Coupe Owners
[Re: 70Cuda383]
#1382482
02/06/13 08:08 PM
02/06/13 08:08 PM
|
Joined: Jan 2005
Posts: 147 Alberta, Canada eh!
70Cudha
OP
member
|
OP
member
Joined: Jan 2005
Posts: 147
Alberta, Canada eh!
|
From what I know about the moldings they were placed on the Gran Coupes. The 70's were styled differently than the 71's.
1970 EV2 Barracuda Hardtop 1970 FE5 Barracuda Gran Coupe Convertible 1969 B5 Dart GTS 383 1968 TT1 Barracuda Convertible 1997 Ram SS/T 2008 3500 Ram Diesel
|
|
|
Re: Calling on 70 Barracuda Gran Coupe Owners
[Re: 70Cudha]
#1382483
02/06/13 10:00 PM
02/06/13 10:00 PM
|
Joined: Jan 2003
Posts: 6,391 Abilene, Texas
fastmark
master
|
master
Joined: Jan 2003
Posts: 6,391
Abilene, Texas
|
Well, for what it is worth. I have a gran coupe for sale here and the fins point up. Here is a pic. Who knows if they have ever been off. Of course mine has the rare "factory" leopard spot headliner as well. It had one of those 6" steering wheels too. Ha!
Last edited by fastmark; 02/06/13 10:03 PM.
|
|
|
Re: Calling on 70 Barracuda Gran Coupe Owners
[Re: fastmark]
#1382485
02/07/13 02:24 AM
02/07/13 02:24 AM
|
Joined: Dec 2007
Posts: 18,157 Mass
DAYCLONA
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 18,157
Mass
|
Quote:
Well, for what it is worth. I have a gran coupe for sale here and the fins point up. Here is a pic. Who knows if they have ever been off. Of course mine has the rare "factory" leopard spot headliner as well. It had one of those 6" steering wheels too. Ha!
I'd have to agree..Fins up, as it looks pretty obvious by the slight angle on the edge of the rocker's edge to mate with the radius of the front fender wheel arch...Should be an angled leading edge to match the front wheel fender wheel opening arch, and straight rear edge to the trailing molding edge at the rear wheel opening arch..
|
|
|
Re: Calling on 70 Barracuda Gran Coupe Owners
[Re: 70Cuda383]
#1382487
02/07/13 11:31 AM
02/07/13 11:31 AM
|
Joined: Dec 2007
Posts: 18,157 Mass
DAYCLONA
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 18,157
Mass
|
Quote:
Quote:
Quote:
Well, for what it is worth. I have a gran coupe for sale here and the fins point up. Here is a pic. Who knows if they have ever been off. Of course mine has the rare "factory" leopard spot headliner as well. It had one of those 6" steering wheels too. Ha!
I'd have to agree..Fins up, as it looks pretty obvious by the slight angle on the edge of the rocker's edge to mate with the radius of the front fender wheel arch...Should be an angled leading edge to match the front wheel fender wheel opening arch, and straight rear edge to the trailing molding edge at the rear wheel opening arch..
but, if you flip them over, and side to side... those angles line up again...
Uhh....No...
Only one end has an angled end, the other end should be "squared"
|
|
|
Re: Calling on 70 Barracuda Gran Coupe Owners
[Re: fastmark]
#1382489
02/07/13 12:52 PM
02/07/13 12:52 PM
|
Joined: Jan 2005
Posts: 147 Alberta, Canada eh!
70Cudha
OP
member
|
OP
member
Joined: Jan 2005
Posts: 147
Alberta, Canada eh!
|
Hey Mark
PM sent.
Just a point of interest. The Gran Coupe convertible that I have was sold new at the Waxahachie, TX dealership back in the day. According to Google Earth that is not that far from Abilene. It found it's way up to Chandler and then Fountain Hills (Phoenix), AZ where I aquired it a couple of years ago.
Thx
1970 EV2 Barracuda Hardtop 1970 FE5 Barracuda Gran Coupe Convertible 1969 B5 Dart GTS 383 1968 TT1 Barracuda Convertible 1997 Ram SS/T 2008 3500 Ram Diesel
|
|
|
|
|