727 TF - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 727 TF

Print Thread

Page 2 of 2

1

2

Re: 727 TF [Re: cjs69mope] #1376512 01/27/13 04:12 PM 01/27/13 04:12 PM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	When I built my trans I planned to use the billet front drum and ultimate sprag. The unexpected expense was the billet front gear. When I pulled the trans apart, several if the gear splines fell out. This was just from pushing a 4,150# Charger into the high 11's.

Re: 727 TF [Re: PRZ] #1376513 01/27/13 05:24 PM 01/27/13 05:24 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Quote: I do understand where you guys are coming from, but i don't think a 800HP 3500lb B-body is a MILD Street Car. I'm looking for something that could last for some duration. Sorry I missunderstood. But Cope can build whatever you need. Ron

Re: 727 TF [Re: 383man] #1376514 01/27/13 05:36 PM 01/27/13 05:36 PM
Joined: Dec 2007 Posts: 54 N.Y. Tioga P PRZ OP member
PRZ OP member P Joined: Dec 2007 Posts: 54 N.Y. Tioga	hey man ,no need to be sorry. It's all good

Re: 727 TF [Re: PRZ] #1376515 01/27/13 06:17 PM 01/27/13 06:17 PM
Joined: Jan 2003 Posts: 2,151 Fancy Farm Ky W wyoming top fuel
wyoming top fuel W Joined: Jan 2003 Posts: 2,151 Fancy Farm Ky	Cope, Dave Smith at Pro Trans, A&A Alision, hard to go wrongt with any of them, they all have an excellent rep for a reason

Re: 727 TF [Re: VernMotor] #1376516 01/27/13 06:45 PM 01/27/13 06:45 PM
Joined: Sep 2003 Posts: 3,426 weymouth,mass. M meepmeep70 master
meepmeep70 master M Joined: Sep 2003 Posts: 3,426 weymouth,mass.	Quote: http://coperacingtrans.com/ absolutely. John is the BEST guy for your trans needs,he helped me huge! needed a tranny asap to install before a big cruise i was going to,he built and had my new tranny in my hands exactly like ha said,and my tranny performs flawlessly.and customer service is the best,you will most likly only talk to john

Re: 727 TF [Re: meepmeep70] #1376517 01/27/13 09:06 PM 01/27/13 09:06 PM
Joined: Sep 2006 Posts: 1,442 central ohio N nss guy pro stock
nss guy pro stock N Joined: Sep 2006 Posts: 1,442 central ohio	A&A Transmission Can't go wrong with the leading "manufacturer" of aftermarket transmission parts.

Re: 727 TF [Re: nss guy] #1376518 01/27/13 10:48 PM 01/27/13 10:48 PM
Joined: Mar 2007 Posts: 1,608 Rudolph, Ohio moparguy7074 top fuel
moparguy7074 top fuel Joined: Mar 2007 Posts: 1,608 Rudolph, Ohio	Quote: A&A Transmission Can't go wrong with the leading "manufacturer" of aftermarket transmission parts. Doesn't CRT buy most of the parts they sell from A&A?

Re: 727 TF [Re: moparguy7074] #1376519 01/27/13 11:14 PM 01/27/13 11:14 PM
Joined: Mar 2004 Posts: 2,475 SW Ohio C cgall top fuel
cgall top fuel C Joined: Mar 2004 Posts: 2,475 SW Ohio	Find a local builder thru your car club or racers in the area. I used to build my own until a guy pointed out to me some things I didn't do correctly. He has built my last 2 and the most I have spent is $1600.

Re: 727 TF [Re: cjs69mope] #1376520 01/28/13 02:38 PM 01/28/13 02:38 PM
Joined: Jan 2003 Posts: 2,771 Cedar Lake IN CRT master
CRT master Joined: Jan 2003 Posts: 2,771 Cedar Lake IN	Quote: Get the 727 hand book Cope helped write it. I used it and all the parts from cope to build a nice street strip trans. Cope rebuild kit red alto clutches and koleen steels. billet servos tf2 or manual valve body 4.2 lever with heavy duty strut red lined bands steel planetary pump modifications done at home per the hand book. 6000 Rpm Governor if using auto shift . put the the money into the parts and build yourself 727 easy to do. this is what i did and then there is my friend has a bone stock trans behind a blown 440 with just a manual valve body for 200 bucks and the trans has held up with street and strip driving so far 10 plus years. a good trans to start with is key . Thanks for the kutos, But I did NOT help wright the 727 HandBook, Carl Munroe is the author.

Re: 727 TF [Re: moparguy7074] #1376521 01/28/13 02:54 PM 01/28/13 02:54 PM
Joined: Jan 2003 Posts: 2,771 Cedar Lake IN CRT master
CRT master Joined: Jan 2003 Posts: 2,771 Cedar Lake IN	Quote: Doesn't CRT buy most of the parts they sell from A&A? I do sell some A&A parts, I would not say MOST, not even close. I have been maken my own parts in house for years. My son Johnny on the mill.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1