70 Cuda bumper bracket part number question - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum 70 Cuda bumper bracket part number question

Print Thread

70 Cuda bumper bracket part number question #1349610 12/11/12 04:45 PM 12/11/12 04:45 PM
Joined: Jan 2003 Posts: 6,391 Abilene, Texas F fastmark OP master
fastmark OP master F Joined: Jan 2003 Posts: 6,391 Abilene, Texas	In looking through my bumper brackets, I found a set with ink stamped part numbers. I know they were on a red barracuda that had been hit in the front at one time and all the front end was replaced with NOS stuff. The ink stamped part # are 2962 442-3 and 2962 446-7. You can still see the partial label from the Chrysler depot. These correspond to the parts book for a 70 with rubber bumpers. They have other numbers stamped on them like normal but the numbers are 2962 444-5 and 2962 448-9. These numbers are not in my 70-71 book. Any one have any explanation?

Re: 70 Cuda bumper bracket part number question [Re: fastmark] #1349611 12/11/12 09:52 PM 12/11/12 09:52 PM
Joined: Dec 2003 Posts: 1,058 Dallas, Texas F FC7cuda super stock
FC7cuda super stock F Joined: Dec 2003 Posts: 1,058 Dallas, Texas	Mark, I can't quite follow your question, are you asking about the origin/application of the ink stamp numbers and the other numbers being on the same part respectivly? Hope all is werll out your way.... Tom 68 Charger 70 Cuda

Re: 70 Cuda bumper bracket part number question [Re: FC7cuda] #1349612 12/11/12 10:37 PM 12/11/12 10:37 PM
Joined: Jan 2003 Posts: 6,391 Abilene, Texas F fastmark OP master
fastmark OP master F Joined: Jan 2003 Posts: 6,391 Abilene, Texas	I am sure that the ink stamps are the correct number for a rubber bumper and are genuine. I am wondering why the numbers that are stamped with steel stamps are different and not in my book as any application. My other bumpers brackets that are made for chrome bumpers are stamped with the correct numbers with steel stamps and they match up with the parts book. If these bumpers did not have the ink stamp, one would not know what they fit by the number steel stamped on them. Make sense? Things are looking up this direction.

Re: 70 Cuda bumper bracket part number question [Re: fastmark] #1349613 12/12/12 10:40 PM 12/12/12 10:40 PM
Joined: Aug 2007 Posts: 601 Mass C charge70 mopar
charge70 mopar C Joined: Aug 2007 Posts: 601 Mass	Quote: In looking through my bumper brackets, I found a set with ink stamped part numbers. I know they were on a red barracuda that had been hit in the front at one time and all the front end was replaced with NOS stuff. The ink stamped part # are 2962 442-3 and 2962 446-7. You can still see the partial label from the Chrysler depot. These correspond to the parts book for a 70 with rubber bumpers. They have other numbers stamped on them like normal but the numbers are 2962 444-5 and 2962 448-9. These numbers are not in my 70-71 book. Any one have any explanation? I would try and find someone with a 70 only parts book.These books have part#'s in them that the 70-71 books don't.One example is the part# for the jack hook for a rubber bumper cuda,it's in the 70 only book but not the 70-71 book. John. 1970 Dodge Charger R/T S.E. 1969 Dodge Dart GTS 440 M-Code 1970 Dodge Charger 500 383/4-speed w/A.C.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1