can someone out there please post a picture of where the choke cable comes out of the firewall for a hemi powered e-body??? im building a 70 clone...THKS!!!!!!!!!!!!

70 Hemi's did not use a manual choke, that was 1971 only. Your car should have an automatic choke.

Off the carb

Here is the choke cable on an original 1971 Hemi Cuda, the dimple to the left is where they would typically come through but this example just used the single hole for both cables, the hole on the right was normally used soley by the Shaker cable. I guess the line worker got lazy that day and just decided to use one hole, you'll notice they were a bit sloppy with this car, niether the hard brake line or the wire harness were even hung through thier respective clips! This pic is of a low mile one owner "Survivor" it's never been altered.

Scott,

How big were both holes ?
Shaker cable hole ?
Choke cable hole ?

logan426

great...thk you....

a, I measured one once and posted it with the measurement on Moparts a million years ago, I can't find the pic right at the moment but it was right around 3/4"-7/8"

Thank you, Scott. Welcome aboard Texas Hemi..

logan426