Does ANYONE sell a dolly with wheels for a Big Block..at a good price?...say $75.00,or less. Any info would be greatly appreciated! Randy B.

Hi Randy

I got this one from Jegs....works fine, even with the heavy Megablock fully assembled.

http://www.jegs.com/i/Jegster/550/1010-S/10002/-1



Ron

Thanks,Buddy! Good price! Does it come with attaching hardware?...can it accomidate my 8" Moroso oil pan?

Randy, you will just need 4 bolts to attach the block to the stand. I have a deep Charlies race pan on the 572 and there was lots of room below. I originally went with the dolly + wheels thinking that the extra height of the casters would help with pan clearance but after i bolted it up, realized that i could have used the non wheel version and been fine.

Get the wheeled version just to be safe (and it is easier to move around) but you'll be OK with the moroso pan.


Ron

Mancini sells a nice one.

Thanks Ron,Cab...and EVERYONE else for your info! I'll most likely order one like Ron's,from Jegs! I know Andy's are VERY NICE....but I can't justify paying $135.00 for something that might only be used once...or twice! Take care guys!..and THANKS again!