Straps, interliners etc? Who has them.??...other then YO ( $70....)

Im interested also. I have a pair that I need to redo since my Mopar Perf ones sagged on me big time!

The rebuild kits will not fix sagging springs...

Frank Badalson sells them.... from his catalog:

Rear leaf spring rebuild kits. ORIGINAL zinc interliners, band clamps with rubber inserts and plastic interliners.One kit does both springs for A, B or E-bodies. Please note our kit comes with the center leaf spring stack bolt. All parts available separately.
Complete Rebuild Kit………specify body style…………………………. $ 165.00

Wow.... from YO catalog

Kit includes correct metal straps with rubber insulators, plastic interliners and zinc interliners. Kit rebuilds both left and right rear springs.
$69

Got mine from BRE.

YO and BRE prices are close....lets see what shipping is...in my expeirence...a 20% deal at YO MIGHT cover the shipping....

Well I got one apart and ready for cleanup etc... the center bolt on the other will not budge....it I end up having to cut it off... availabel?

I am wondering about rebuilding the ones I have on the car. I am wondering about the finish. I read an informative discussion here on people recommending what finish. I heard several opinions. What about powdercoating the leaf springs? Do the leaf springs flex too much for powdercoating to stick? Cannot anyone link that topic where people showed what they use to coat the real leaf springs with??

If natural steel you can soak them in Evaporust (use a length of PVC pipe as small as they will fit into, cap both ends, fill with Evaporust, soak a couple days to remove all the rust). Once the rust is gone remove them and rinse them with laquer thinner (not water). After dry add back any inspection paint daubs you find then coat each one with RPM (ECS sells it) and reassemble them...You'll be good to go!

Most spring sets that were painted black were painted as a completed assembly so it's easy, just derust/clean them then bomb them with a dull gloss epoxy paint. Adding it until it's almost dripping off will give you a factory look, most look as though they were actually dipped in paint at the factory.

Scott how would one know if the springs should be natural or painted? i.e. what years and body styles had natural and what ones were painted.

I wouldn't say that either way is written in stone, there seems to be some variable on whether they were painted or not depending on the year, body style, and even the plant they came from. The best way to know for sure is to carefully study your originals for signs of paint.

Thats the problem everything seemed to spray bombed at one time. I guess probably the next best thing I can do is when I remove them is to see what they look like under the rear end housing spring perches. Thanks Scott

Yes, that's all true. I'm doing my Los Angeles built 71 Dusters springs now, problem is that all of the survivors I've seen were Hamtramck cars (which were all painted black). My cars originals were missing so no good for reference, other original LA cars I've seen appeared to have natural springs but so far none of them were 71 Dusters so I can't be 100% sure yet. So, I'm going to do them up natural and if I learn that they should be painted it's an easy fix to pull them for a paint job, not so if done in the reverse.

Was everything from Hamtramck painted or did it just pertain to certain body styles? Looking to get the correct finish on my 69 Charger leaf springs that is a Hamtramck car also.

I can't say, I've seen what appeared to be originals both ways

ok, the ones that were on my car originally appeared to have been natural steel originally and not painted. Just wanted to be sure as 40 years a lot of things can be changed.

Update. got mine all apart...had to cut off one center bolt...

Had all the pieces sandbalsted.. picked up today and suprise..my can of RPM was in the mailbox. Awesome stuff!! all treated and waiting on my rebuild kit and new bolts... they look good!!

dont tease us - lets see a pics....

I would like to see some finished leaf spring rebuilds. I want to see whether I like the dark natural, or black painted springs.

OK....sorry..:)

Before

After...still waiting on rebuild kit

Those came out nice. Thanks for posting the pictures.

This is with the Evaporust & RPM treatment mentioned above?

No...I had them sandblasted and then appied RPM

Wire wheeled mine to get some of the crud off, then evaporust and finished with RPM. Here is a pic of a finished spring next to an unfinished spring.

Another.

Sweet! Thanks guys.