NSS guys what carb. - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech NSS guys what carb.

Print Thread

NSS guys what carb. #1314500 10/03/12 10:44 AM 10/03/12 10:44 AM
Joined: Aug 2004 Posts: 1,413 Newark,Ohio kissmyaspen OP pro stock
kissmyaspen OP pro stock Joined: Aug 2004 Posts: 1,413 Newark,Ohio	I know they have to be factory or eddys for NSS but we have a 800 cfm on our car now but still not running like it should.. what have you guys done to yours or who have you sent your to. any info would be great. 79 Dodge Aspen 12.265 at 109.75 MPH 67 Satellite NSS/E 11.83 @ 110 1968 Plymouth Road Runner 472 Hemi 3 time MOPAR NATIONALS CHAMP '03 FWD and '06 & '09 Street. '07, '10, '12 Mopar Nats runner-up Street.

Re: NSS guys what carb. [Re: kissmyaspen] #1314501 10/03/12 12:04 PM 10/03/12 12:04 PM
Joined: Jan 2003 Posts: 6,353 Aurora, Oh. M max_maniac master
max_maniac master M Joined: Jan 2003 Posts: 6,353 Aurora, Oh.	I have been running the Eddy carbs now for at least the last 8 years and have not sent them to anyone yet but the thought has crossed my mind (Dvorak if anyone). I run 2 of the 800's on mine and it's just a matter of tuning them right with squirters, jetting and metering rods. Jet for MPH and then play with the rods to get them correct for the air. The front squirters and the pump rods are for initial hit. I am no expert at all when it comes to these but I can get my car to run decent and consistant. So what is the problem you are having? Russ

Re: NSS guys what carb. [Re: kissmyaspen] #1314502 10/03/12 12:18 PM 10/03/12 12:18 PM
Joined: Jul 2010 Posts: 680 COLUMBUS, OH W Whompin_Wedge mopar
Whompin_Wedge mopar W Joined: Jul 2010 Posts: 680 COLUMBUS, OH	Dustin, Damon Kuhn is who did ours. Gary Jacob on this board should be able to help you as well, he is on this board and knows a lot about them. Also my old man is pretty darn good at going through them, he has helped a few people out getting them to run. If you are out there this weekend he said he would go through it for ya. By the way we sold the other set we had, that I was telling you about... Hope this helps, Casey

Re: NSS guys what carb. [Re: Whompin_Wedge] #1314503 10/03/12 01:02 PM 10/03/12 01:02 PM
Joined: Aug 2004 Posts: 1,413 Newark,Ohio kissmyaspen OP pro stock
kissmyaspen OP pro stock Joined: Aug 2004 Posts: 1,413 Newark,Ohio	thanks Casey and Russ.. at the mopar nats we had eddy go through them and they where changing thing and helping us out a lot.. with the last setup they did it now it feels like the car wants to go, bog, then good again and then i feel it nose over about 900ft and then comes back alive at 1100ft.. RMP's just dont climb like they should and it was a night and day difference from the eddy to my holley i have on my car. 79 Dodge Aspen 12.265 at 109.75 MPH 67 Satellite NSS/E 11.83 @ 110 1968 Plymouth Road Runner 472 Hemi 3 time MOPAR NATIONALS CHAMP '03 FWD and '06 & '09 Street. '07, '10, '12 Mopar Nats runner-up Street.

Re: NSS guys what carb. [Re: kissmyaspen] #1314504 10/03/12 06:21 PM 10/03/12 06:21 PM
Joined: Dec 2005 Posts: 293 Kansas City Metro M mbogina enthusiast
mbogina enthusiast M Joined: Dec 2005 Posts: 293 Kansas City Metro	In SS/DA, we use the 625 Carter/Eddy's as modified by Val Hedworth of Hedworth Racing, Macon, Mo, 660-385-2536 Be a Rebel- Break the Laws of Physics!

Re: NSS guys what carb. [Re: mbogina] #1314505 10/03/12 08:11 PM 10/03/12 08:11 PM
Joined: Sep 2006 Posts: 1,443 central ohio N nss guy pro stock
nss guy pro stock N Joined: Sep 2006 Posts: 1,443 central ohio	if your running a single afb carb it probably will never be as fast as a single holley. the bog or hesitation is probably in the metering rod step up springs. read this link a couple of times and you should be able to get it as good as anyone. but then again my car never runs the same twice http://www.diamondbackengines.com/technical-white-papers/carter-afbavs/

Re: NSS guys what carb. [Re: nss guy] #1314506 10/03/12 09:14 PM 10/03/12 09:14 PM
Joined: Dec 2003 Posts: 1,401 Wi. old_racer pro stock
old_racer pro stock Joined: Dec 2003 Posts: 1,401 Wi.	Quote: if your running a single afb carb it probably will never be as fast as a single holley. the bog or hesitation is probably in the metering rod step up springs. read this link a couple of times and you should be able to get it as good as anyone. but then again my car never runs the same twice http://www.diamondbackengines.com/technical-white-papers/carter-afbavs/ but then again my car never runs the same twice yea right Jim, 10:50, 10:51,10:50 10:51 all night long. ha. ha. your car is pretty darn consistant. good reading tho like you said. Russ

Re: NSS guys what carb. [Re: old_racer] #1314507 10/04/12 12:51 AM 10/04/12 12:51 AM
Joined: Oct 2003 Posts: 1,134 OHIO THE HEART OF IT ALL 64hemi330sedan super stock
64hemi330sedan super stock Joined: Oct 2003 Posts: 1,134 OHIO THE HEART OF IT ALL	i find this thread interesting.i relutantly put a single out of the box stock 800 eddy on my 65 street car so i could race n/ss at indy monster mopar.i had a 850 holley on the car before.i thought for sure my car would slow down.much to my surprise my car was a little more than a tenths faster with the 800 eddy.i never would have thought it would be faster than the holley.even though the calculator said my combo only needed a 780 cfm carb.i was going to take it off when i got home but it drives so well im leaving it on the car for now. 7406418-meatmmwfallball.jpg (84 downloads)

Re: NSS guys what carb. [Re: 64hemi330sedan] #1314508 10/04/12 12:59 AM 10/04/12 12:59 AM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	Quote: i find this thread interesting.i relutantly put a single out of the box stock 800 eddy on my 65 street car so i could race n/ss at indy monster mopar.i had a 850 holley on the car before.i thought for sure my car would slow down.much to my surprise my car was a little more than a tenths faster with the 800 eddy.i never would have thought it would be faster than the holley.even though the calculator said my combo only needed a 780 cfm carb.i was going to take it off when i got home but it drives so well im leaving it on the car for now. I loved my six pack but I love my eddie's more. just not as impressive looking Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Re: NSS guys what carb. [Re: sixpackgut] #1314509 10/04/12 09:27 AM 10/04/12 09:27 AM
Joined: Aug 2004 Posts: 1,413 Newark,Ohio kissmyaspen OP pro stock
kissmyaspen OP pro stock Joined: Aug 2004 Posts: 1,413 Newark,Ohio	when we put it on out of the box on the new motor it was about a tenth slow.. but i think a lot of it was in valve springs. the car had sat for about 4 years.. and was super consistent.. when i went to the 10 grander last year 5 out of my 7 passes for the weekend where 7.63's. but i had this bright idea of changing motors this year the week before the mopar nats, so we didnt get much testing in.. thanks for the info 79 Dodge Aspen 12.265 at 109.75 MPH 67 Satellite NSS/E 11.83 @ 110 1968 Plymouth Road Runner 472 Hemi 3 time MOPAR NATIONALS CHAMP '03 FWD and '06 & '09 Street. '07, '10, '12 Mopar Nats runner-up Street.

Re: NSS guys what carb. [Re: 64hemi330sedan] #1314510 10/04/12 01:56 PM 10/04/12 01:56 PM
Joined: Aug 2006 Posts: 290 Cincinnati, Ohio d7cook enthusiast
d7cook enthusiast Joined: Aug 2006 Posts: 290 Cincinnati, Ohio	Quote: i find this thread interesting.i relutantly put a single out of the box stock 800 eddy on my 65 street car so i could race n/ss at indy monster mopar.i had a 850 holley on the car before.i thought for sure my car would slow down.much to my surprise my car was a little more than a tenths faster with the 800 eddy.i never would have thought it would be faster than the holley.even though the calculator said my combo only needed a 780 cfm carb.i was going to take it off when i got home but it drives so well im leaving it on the car for now. We've had a Holley 850 for years and just about everything we put it on slows down. Been through it and through it looking for issues but for some reason it's a turd. 1967 Coronet, 1989 Daytona tube chassis. Former cars, 66 Charger, 67 R/T, 69 Coronet, 67 Dart GT. -Banned for life from V8Buick.com-

Re: NSS guys what carb. [Re: d7cook] #1314511 10/07/12 01:00 PM 10/07/12 01:00 PM
Joined: Jan 2003 Posts: 1,809 North Dakota Azzkikrcuda top fuel
Azzkikrcuda top fuel Joined: Jan 2003 Posts: 1,809 North Dakota	Similar experiance here too. I have an older Holley 800DP and an 800 Edelbrock. Tuned both with an AFR gauge and at the track. Have never been able to get the Holley to match the Edelbrocks times at the track.

Re: NSS guys what carb. [Re: Azzkikrcuda] #1314512 10/20/12 09:47 PM 10/20/12 09:47 PM
Joined: Apr 2003 Posts: 1,613 Burlington,Ont. 77DragracerR/T top fuel
77DragracerR/T top fuel Joined: Apr 2003 Posts: 1,613 Burlington,Ont.	If your Eddy carb is nosing over on you it's usually the springs that are causing that problem.I found a stiffer spring worked best in those carbs. I raced my car with a 360 and had a 750 eddy carb that worked great. 77 Aspen R/T 60'@1.41 10.76 @ 123.26 http://www.youtube.com/watch?v=Eya3Ue8KoZk

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1