world block - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech world block

Print Thread

world block #1294912 09/01/12 12:39 AM 09/01/12 12:39 AM
Joined: Jan 2011 Posts: 511 florida dade C cesar perez OP mopar
cesar perez OP mopar C Joined: Jan 2011 Posts: 511 florida dade	my question is if a world block has a 45 degree lifter angle if b1 heads can be used and if the block has a raised can opsion with a 60 mm cam tunnel what is the largest crank that can be installed and with the b1 heads how big of bore can i go thanks guys please reply

Re: world block [Re: cesar perez] #1294913 09/01/12 01:44 AM 09/01/12 01:44 AM
Joined: Jul 2010 Posts: 791 Bama Randy.. super stock
Randy.. super stock Joined: Jul 2010 Posts: 791 Bama	i had a alum world and they said it would go 4.560 bore and 4.750 stroke with the raised cam, but sold it so could not tell you for shure.

Re: world block [Re: Randy..] #1294914 09/01/12 08:29 AM 09/01/12 08:29 AM
Joined: Jul 2006 Posts: 395 campbell river B.C M mopartoby enthusiast
mopartoby enthusiast M Joined: Jul 2006 Posts: 395 campbell river B.C	I went 4.75 stroke on my standard cam height block with steal rods. I think with the raised csm you go 5 inch with steal rods or 4.75 with aluminum rods. Don't quote me on that though.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1