70 440 ENGINE DETAIL ??????? - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum 70 440 ENGINE DETAIL ???????

Print Thread

70 440 ENGINE DETAIL ??????? #1291187 08/25/12 02:45 PM 08/25/12 02:45 PM
Joined: Jan 2003 Posts: 6,224 JERSEY RJS OP master
RJS OP master Joined: Jan 2003 Posts: 6,224 JERSEY	Should the PCV hose and booster hose be dated prior to engine assembly or was it prior to car's SPD or other?? Thanks Ron

Re: 70 440 ENGINE DETAIL ??????? [Re: RJS] #1291188 08/25/12 03:09 PM 08/25/12 03:09 PM
Joined: Jan 2003 Posts: 74,978 U.S.S.A. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 74,978 U.S.S.A.	They were installed, I would ASSuME, AFTER engine assembly but BEFORE installed in the car so I would ASSuME somewhere in between or just before the engine depending on how long the roll was they were cut from ???

Re: 70 440 ENGINE DETAIL ??????? [Re: JohnRR] #1291189 08/25/12 09:29 PM 08/25/12 09:29 PM
Joined: Jan 2003 Posts: 6,224 JERSEY RJS OP master
RJS OP master Joined: Jan 2003 Posts: 6,224 JERSEY	Thanks John, I was thinking that since the engine didn't know which car it was going in when assembled and in reality dates on those hoses don't really matter I just like the pretty yellow printing!! Ron

Re: 70 440 ENGINE DETAIL ??????? [Re: RJS] #1291190 08/26/12 11:27 AM 08/26/12 11:27 AM
Joined: Jun 2003 Posts: 21,406 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,406 It's a dry heat	I tend to think hoses were installed sometime after engine assy but before said engine was installed in the chassis. WHEN that was or how much of a lag time between the 2 ? The few originals I've had to libery to view, the hose had orange paint on them . Tellling me they were done immediately after the engine was painted

Re: 70 440 ENGINE DETAIL ??????? [Re: gtx6970] #1291191 08/26/12 08:47 PM 08/26/12 08:47 PM
Joined: Jan 2003 Posts: 6,224 JERSEY RJS OP master
RJS OP master Joined: Jan 2003 Posts: 6,224 JERSEY	Quote: I tend to think hoses were installed sometime after engine assy but before said engine was installed in the chassis. WHEN that was or how much of a lag time between the 2 ? The few originals I've had to libery to view, the hose had orange paint on them . Telling me they were done immediately after the engine was painted That's good info. Bill, that tells me to have them dated between casting date and a assembly date. Probably closer to casting date since they were probably on a reel and rolled out and cut when needed.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1