Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Need to lose weight o my 71 Dart #1286457
08/16/12 05:57 PM
08/16/12 05:57 PM
Joined: Mar 2009
Posts: 814
in front of the computer
8
80arrow Offline OP
super stock
80arrow  Offline OP
super stock
8

Joined: Mar 2009
Posts: 814
in front of the computer
I finally got my Dart going and weighed it at the track. 3550 race ready. I have a glass front bumper and aluminum bumper brackets, otherwise its all steel. The interior has a set of race buckets, otherwise thats all original. Also has aluminum wheels. What would be my best bang for the buck to reduce weight. I'd like to lose about 300 lbs on it over the winter. Thanks for any input, Clint

Re: Need to lose weight o my 71 Dart [Re: 80arrow] #1286458
08/16/12 06:04 PM
08/16/12 06:04 PM
Joined: Oct 2007
Posts: 485
Raleigh, NC
J
j.mcconnell Offline
mopar
j.mcconnell  Offline
mopar
J

Joined: Oct 2007
Posts: 485
Raleigh, NC
300lbs should lighten your wallet a good bit. I'd say race weight glass hood, lightweight brakes, aluminum heads and lighter front suspension (tube k or chopped up stocker)

Re: Need to lose weight o my 71 Dart [Re: j.mcconnell] #1286459
08/16/12 06:07 PM
08/16/12 06:07 PM
Joined: Mar 2009
Posts: 814
in front of the computer
8
80arrow Offline OP
super stock
80arrow  Offline OP
super stock
8

Joined: Mar 2009
Posts: 814
in front of the computer
Forgot to mention it has aluminum heads.

Re: Need to lose weight o my 71 Dart [Re: 80arrow] #1286460
08/16/12 08:00 PM
08/16/12 08:00 PM
Joined: Feb 2003
Posts: 1,942
Metro Detroit
OUTLAWD Offline
top fuel
OUTLAWD  Offline
top fuel

Joined: Feb 2003
Posts: 1,942
Metro Detroit
wow, that seems heavy...last time I was at the track, the scales weren't up....but my car alone was ~3200# last time I weighed it, full bench seat interior, AAR bolt on hood, rest is steel.

Aluminum rad
aluminum manual steering box
aluminum master cylinder
denso alternator (lighter and better)
mini starter

not sure how much you want to "hack" it up
remove heater
remove radio/speaker
scrape black seam sealer off floors
glass fenders/hood
remove back seat/carpet

I always wanted to replace my pot metal front fender caps with the fiberglass ones used on some factory cars...why someone doesn't repop these in fiberglass...I don't know

http://www.hotrod.com/howto/113_0310_weight_reduction/viewall.html

let me know how you make out...I'm after some weight loss/power gain mods this winter as well


Faster, Faster until the thrill of speed overcomes the fear of death...

71 Swinger - slowly collecting dust/parts
66 Belv. II - just a streetcar
88 Mustang - turbo LS beater
Re: Need to lose weight o my 71 Dart [Re: 80arrow] #1286461
08/16/12 08:14 PM
08/16/12 08:14 PM
Joined: Aug 2007
Posts: 1,271
Vista, California
6
67Satty Offline
pro stock
67Satty  Offline
pro stock
6

Joined: Aug 2007
Posts: 1,271
Vista, California
Quote:

I finally got my Dart going and weighed it at the track. 3550 race ready. I have a glass front bumper and aluminum bumper brackets, otherwise its all steel. The interior has a set of race buckets, otherwise thats all original. Also has aluminum wheels. What would be my best bang for the buck to reduce weight. I'd like to lose about 300 lbs on it over the winter. Thanks for any input, Clint




That seems pretty heavy for that car. Sure the scales are accurate? My '67 Satellite with full interior, all steel, steel wheels, full exhaust and iron heads weighs only 90 pounds more - 3640.

Re: Need to lose weight o my 71 Dart [Re: OUTLAWD] #1286462
08/16/12 08:19 PM
08/16/12 08:19 PM
Joined: Jan 2003
Posts: 10,015
Frostbitefalls MN (Rocky&Bullw...
gregsdart Offline
I Live Here
gregsdart  Offline
I Live Here

Joined: Jan 2003
Posts: 10,015
Frostbitefalls MN (Rocky&Bullw...
Hey Clint, watched you make a pass, and a 9.38 ET is getten down the road!
Clints Dart has a procharged 408 small block. Very nice ride, and a real sleeper when you see it pull to the line.
The back seat and brakes are about all I would do. If you do remove the back seats you could take the window crank mechanisms out and use a solid strut to hold the glass up. Same with the passenger window, but I would leave the drivers window stock. If you run Caltracs, there must be a lot of weight there. Ladder bars are light. Spendy, but also a suspension upgrade. They may be a bit harsh for the street if you street drive it though. Someone should chime in with the weight difference, I don't know how much there is.

Last edited by gregsdart; 08/16/12 08:22 PM.

8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
Re: Need to lose weight o my 71 Dart [Re: 80arrow] #1286463
08/16/12 08:23 PM
08/16/12 08:23 PM
Joined: Jan 2003
Posts: 9,826
las vegas
70AARcuda Offline
master
70AARcuda  Offline
master

Joined: Jan 2003
Posts: 9,826
las vegas
My 71 Dart 360 weights in at 2745 with no driver.

fiberglass front bumper and brackets
fiberglass rear bumper and crush panel
fiberglass hood
fiberglass trunk lid
weld drag lite wheels
aluminium radiator
aluminium heads
one fiberglass racing seat
stock wiring harness removed
quarter windows are lexan with regulators removed.
5 gallon fuel cell..two batteries in trunk.
no heater..no wipers...

have lite weight brakes left to install on front and rear..still has stock KH disc in front and drums in rear.

Last edited by 70AARcuda; 08/16/12 08:27 PM.

Tony

70 AARCuda Vitamin C
71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield)
71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas)
71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)
Re: Need to lose weight o my 71 Dart [Re: OUTLAWD] #1286464
08/16/12 10:12 PM
08/16/12 10:12 PM
Joined: Mar 2009
Posts: 814
in front of the computer
8
80arrow Offline OP
super stock
80arrow  Offline OP
super stock
8

Joined: Mar 2009
Posts: 814
in front of the computer
Quote:

wow, that seems heavy...last time I was at the track, the scales weren't up....but my car alone was ~3200# last time I weighed it, full bench seat interior, AAR bolt on hood, rest is steel.

Aluminum rad
aluminum manual steering box
aluminum master cylinder
denso alternator (lighter and better)
mini starter

not sure how much you want to "hack" it up
remove heater
remove radio/speaker
scrape black seam sealer off floors
glass fenders/hood
remove back seat/carpet

I always wanted to replace my pot metal front fender caps with the fiberglass ones used on some factory cars...why someone doesn't repop these in fiberglass...I don't know

http://www.hotrod.com/howto/113_0310_weight_reduction/viewall.html

let me know how you make out...I'm after some weight loss/power gain mods this winter as well





I'm sure the scales are accurate. Like Greg said its a procharged 408, so it has an intercooler, meth tank, procharger, exhuast, full interior, basically a a stock bodied car with full interior. I've done the alum. rad, alum. steering box, alum. m/c, and mini starter. I'm running a altenator off a 90's Chevy pick-up so I don't have to charge between runs. I don't want to hack it up but if I can do stuff thats not obvious in apperance I will.

Greg, I am running Caltracs, I can't run ladder bars becuase of the class I want to run in, it has to have factory type suspension. The best I got last weekend was a 9.50@144.5, I'm still working on getting it to hook off the line. Hopefully by Muscle car weekend I'll have new shocks for it.

I will have to put aftermarket disks on it on all four corners this winter. I'm just looking for ideas as to the most cost effective way to lose weight this winter.

Re: Need to lose weight o my 71 Dart [Re: 80arrow] #1286465
08/16/12 11:27 PM
08/16/12 11:27 PM
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY Offline
Master
MR_P_BODY  Offline
Master

Joined: Jun 2003
Posts: 52,972
Romeo MI
What the others have said plus the door impact beams

Re: Need to lose weight o my 71 Dart [Re: MR_P_BODY] #1286466
08/17/12 05:42 PM
08/17/12 05:42 PM
Joined: Aug 2003
Posts: 3,245
Between a rock & a hard place
C
cudadoug Offline
master
cudadoug  Offline
master
C

Joined: Aug 2003
Posts: 3,245
Between a rock & a hard place
I'd LOVE to see pics of this Dart...

Re: Need to lose weight o my 71 Dart [Re: OUTLAWD] #1286467
08/17/12 06:00 PM
08/17/12 06:00 PM
Joined: Feb 2007
Posts: 6,295
U.S.
M
moparniac Offline
master
moparniac  Offline
master
M

Joined: Feb 2007
Posts: 6,295
U.S.
my 71 Dart is 3400 with me in it! which I think is heavy with an aluminum block! car is fully loaded though and with a 12pt cage and strange brakes also...


Mopar Performance
Re: Need to lose weight o my 71 Dart [Re: MR_P_BODY] #1286468
08/17/12 06:03 PM
08/17/12 06:03 PM
Joined: Nov 2009
Posts: 2,177
ill
D
dennismopar73 Offline
top fuel
dennismopar73  Offline
top fuel
D

Joined: Nov 2009
Posts: 2,177
ill
Quote:

What the others have said plus the door impact beams




only some 71 had that!! I have own 3 71 none had the beam in the doors!!
unless someone changed them to earlier year?
never had a dart that weight as much as he has,
The last dart I had was 3175 all the others where in that range,
even a demon was 3170 w driver! full street car w a big block
so I will think the scales are dade on the heavy side,

Re: Need to lose weight o my 71 Dart [Re: dennismopar73] #1286469
08/17/12 06:12 PM
08/17/12 06:12 PM
Joined: Mar 2009
Posts: 1,058
bigfork mn
D
dragram440 Offline
super stock
dragram440  Offline
super stock
D

Joined: Mar 2009
Posts: 1,058
bigfork mn
Hi Clint. Hope to see it run at Muscle car shootout! Sounds like its going to be a screamer! I would leave it in street trim. Looks so nice right now. I have been gutting mine out a bit.

Last edited by dragram440; 08/17/12 06:13 PM.

67' charger 499 RB 10.57 at 127
Re: Need to lose weight o my 71 Dart [Re: dragram440] #1286470
08/17/12 06:24 PM
08/17/12 06:24 PM
Joined: Mar 2004
Posts: 2,475
SW Ohio
C
cgall Offline
top fuel
cgall  Offline
top fuel
C

Joined: Mar 2004
Posts: 2,475
SW Ohio
Fuel cell
chromemoly cage
gun-drilled axles
split monos
lighter driver...

Re: Need to lose weight o my 71 Dart [Re: cgall] #1286471
08/17/12 07:00 PM
08/17/12 07:00 PM
Joined: Aug 2003
Posts: 1,385
Ohio
rck850 Offline
pro stock
rck850  Offline
pro stock

Joined: Aug 2003
Posts: 1,385
Ohio
I guess I did something right. My 73 duster weighs 3200lbs without me in it. It's a all iron 440, full interior,fold down rear seat and all other factory metal except the hood which is a heavy weight AAR fiberglass piece.

7339477-001resize.jpg (85 downloads)
Re: Need to lose weight o my 71 Dart [Re: cgall] #1286472
08/17/12 07:04 PM
08/17/12 07:04 PM
Joined: Nov 2003
Posts: 5,160
Texas
dannysbee Offline
master
dannysbee  Offline
master

Joined: Nov 2003
Posts: 5,160
Texas
light weight strut rods, k member,moly steering link, moly steering shaft, driveshaft, 3 lbs in 33 places.


Getting old just means you were smarter than some and luckier than others.
Re: Need to lose weight o my 71 Dart [Re: dannysbee] #1286473
08/17/12 07:17 PM
08/17/12 07:17 PM
Joined: Jan 2003
Posts: 16,376
D
dogdays Offline
I Live Here
dogdays  Offline
I Live Here
D

Joined: Jan 2003
Posts: 16,376
Brake disks, hubs and calipers have a lot of weight.

R.

Re: Need to lose weight o my 71 Dart [Re: dogdays] #1286474
08/17/12 07:22 PM
08/17/12 07:22 PM
Joined: May 2006
Posts: 1,073
oregon
G
greendart408 Offline
super stock
greendart408  Offline
super stock
G

Joined: May 2006
Posts: 1,073
oregon
Quote:

Brake disks, hubs and calipers have a lot of weight.

R.




I agree, I went from factory big bolt disks and spindle to aerospace front brakes and 9in spindle and dropped 52 lbs exactly on my dart.

Re: Need to lose weight o my 71 Dart [Re: greendart408] #1286475
08/17/12 07:36 PM
08/17/12 07:36 PM
Joined: Jan 2003
Posts: 6,266
Renton Washington
T
Triple Threat Offline
master
Triple Threat  Offline
master
T

Joined: Jan 2003
Posts: 6,266
Renton Washington
Quote:

Quote:

Brake disks, hubs and calipers have a lot of weight.

R.




I agree, I went from factory big bolt disks and spindle to aerospace front brakes and 9in spindle and dropped 52 lbs exactly on my dart.





-Dustin
67 Dart, 9 second, 392" G3 Hemi
68 Barracuda 340 F/SA
Re: Need to lose weight o my 71 Dart [Re: dragram440] #1286476
08/18/12 06:33 PM
08/18/12 06:33 PM
Joined: Mar 2009
Posts: 814
in front of the computer
8
80arrow Offline OP
super stock
80arrow  Offline OP
super stock
8

Joined: Mar 2009
Posts: 814
in front of the computer
Quote:

Hi Clint. Hope to see it run at Muscle car shootout! Sounds like its going to be a screamer! I would leave it in street trim. Looks so nice right now. I have been gutting mine out a bit.




Het Matt, hows it going? Are you going to be running down there? How about Phil? What have you been doing with your car?

Page 1 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1