67 426 Hemi Stamping Pad

Print Thread

67 426 Hemi Stamping Pad #1285173 08/14/12 09:42 AM 08/14/12 09:42 AM
Joined: Nov 2006 Posts: 23 Apollo Beach, Florida 6769Mopars OP member
6769Mopars OP member Joined: Nov 2006 Posts: 23 Apollo Beach, Florida	I recently bought an original hemi GTX and want to know more about the stamping pad. I do see that the engine was assembled 8-11-66 (cast 6-28-66; car built C03 - Dec. 3, 66). 7334621-Engine_Stamp_Small.jpg (55 downloads)

Re: 67 426 Hemi Stamping Pad [Re: 6769Mopars] #1285174 08/14/12 10:03 AM 08/14/12 10:03 AM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms Mr Wizzard
ScottSmith_Harms Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	C= 1967 Model year H = Hemi 426 = Cubic inches WT = Water Tested Block 8 = August (1966) 11 = 11th day The 19 24 12 looks like something non typical, weather it was added at the factory or sometime after is hard to say Overall I'm thinking that most or all of that pad might have been restamped, something just doesn't look right about it. clean off all of the paint and get a GOOD hi res photo of the pad which might show the surface of the steel a bit better and reveal possible older shallower stampings.

Hop To