Installing a Shaker on a 71 Cuda with A/C - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Installing a Shaker on a 71 Cuda with A/C

Print Thread

Installing a Shaker on a 71 Cuda with A/C #1280322 08/06/12 10:38 AM 08/06/12 10:38 AM
Joined: Apr 2006 Posts: 32 SOUTHERN, MN M MOPARRESTORER OP member
MOPARRESTORER OP member M Joined: Apr 2006 Posts: 32 SOUTHERN, MN	We have a 71 Cuda convert 340 with factory A/C. The customer wants a Shaker installed but also wants to keep the factory A/C. We bought all new Shaker hood and 340 bubble kit from Ben Snobar's NW Performance. Now my question is who has done this before and how any tips or trick would be appreciated. Thanks Jeremy

Re: Installing a Shaker on a 71 Cuda with A/C [Re: MOPARRESTORER] #1280323 08/06/12 04:16 PM 08/06/12 04:16 PM
Joined: May 2005 Posts: 1,178 MN ryangtogtx super stock
ryangtogtx super stock Joined: May 2005 Posts: 1,178 MN	Here's a link to a thread that I had asked awhile back on the same topic. https://board.moparts.org/ubbthreads/show...&PHPSESSID=

Re: Installing a Shaker on a 71 Cuda with A/C [Re: ryangtogtx] #1280324 08/06/12 05:48 PM 08/06/12 05:48 PM
Joined: Aug 2005 Posts: 4,799 ILL M MLR426 master
MLR426 master M Joined: Aug 2005 Posts: 4,799 ILL	You have to use a Sanden compressor and Bouchillon brackets. MLR426

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1