Trans brake wiring ? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Trans brake wiring ?

Print Thread

Trans brake wiring ? #1269537 07/17/12 02:04 PM 07/17/12 02:04 PM
Joined: Apr 2009 Posts: 117 Muskegon Mi D dcr OP member
dcr OP member D Joined: Apr 2009 Posts: 117 Muskegon Mi	Recently installed my new tranzact 727 with a ultimate brake and having trouble getting a hold of Joe to ask what gauge wire I should use. I currently have it wired with 14 ga wire is this sufficiant?

Re: Trans brake wiring ? [Re: dcr] #1269538 07/17/12 02:23 PM 07/17/12 02:23 PM
Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY	Should be fine, that's what we used on ours. What kind of a two step are you running? Although with ours I ended up using a relay for the two step, the trnas brake itself has never needed a relay to it. Last edited by Dragula; 07/17/12 02:42 PM. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: Trans brake wiring ? [Re: Dragula] #1269539 07/17/12 10:12 PM 07/17/12 10:12 PM
Joined: Apr 2009 Posts: 117 Muskegon Mi D dcr OP member
dcr OP member D Joined: Apr 2009 Posts: 117 Muskegon Mi	Thank you for info Im useing a MSD 2 step no relays on any thing I would think they would be a low current draw and not require a relay.

Re: Trans brake wiring ? [Re: dcr] #1269540 07/17/12 10:35 PM 07/17/12 10:35 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Quote: Thank you for info Im useing a MSD 2 step no relays on any thing I would think they would be a low current draw and not require a relay. Most trans brakes dont draw alot so 14 gauge is fine

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1