How to re install power steering pump pulley? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer How to re install power steering pump pulley?

Print Thread

How to re install power steering pump pulley? #1262480 07/06/12 12:41 AM 07/06/12 12:41 AM
Joined: Aug 2007 Posts: 828 KS M MoparKansas OP super stock
MoparKansas OP super stock M Joined: Aug 2007 Posts: 828 KS	I found my pulley puller in the garage and needed to swap a non bent pulley to a good pump. I have them both off now how do I put the good one back on?

Re: How to re install power steering pump pulley? [Re: MoparKansas] #1262481 07/06/12 12:47 AM 07/06/12 12:47 AM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Does the shaft have a threaded hole? "The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."

Re: How to re install power steering pump pulley? [Re: 1_WILD_RT] #1262482 07/06/12 01:03 AM 07/06/12 01:03 AM
Joined: Aug 2003 Posts: 12,291 Kent, Wa 340SHORTY Truck Nut
340SHORTY Truck Nut Joined: Aug 2003 Posts: 12,291 Kent, Wa	Get a pully instaler tool. I am truckless..

Re: How to re install power steering pump pulley? [Re: 340SHORTY] #1262483 07/06/12 01:07 AM 07/06/12 01:07 AM
Joined: Jan 2007 Posts: 7,664 IN A ahy master
ahy master A Joined: Jan 2007 Posts: 7,664 IN	Quote: Get a pully instaler tool. Available at Autozone as "loan a tool".

Re: How to re install power steering pump pulley? [Re: 1_WILD_RT] #1262484 07/06/12 11:15 AM 07/06/12 11:15 AM
Joined: Aug 2007 Posts: 828 KS M MoparKansas OP super stock
MoparKansas OP super stock M Joined: Aug 2007 Posts: 828 KS	No it does not have a hole. Here is the link to the set I have and it looks like it needs a hole to reinstall? http://manuals.harborfreight.com/manuals/40000-40999/40749.pdf Are you supposed to just press it back on?

Re: How to re install power steering pump pulley? [Re: MoparKansas] #1262485 07/06/12 12:47 PM 07/06/12 12:47 PM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Yes it will press back on but in order to press it on you need to remove the reservoir so the pressing is actually directly on the shaft..... "The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1