Re: is this agood cam for street car?
[Re: stumpy]
#1253907
06/19/12 07:24 PM
06/19/12 07:24 PM
|
Joined: Jan 2003
Posts: 6,266 Renton Washington
Triple Threat
master
|
master
Joined: Jan 2003
Posts: 6,266
Renton Washington
|
It's all relative, that one is smaller than the one in my Dart that I drive on the streets.
Depends on what its going in and what you expect it to do.
-Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA
|
|
|
Re: is this agood cam for street car?
[Re: radar]
#1253910
06/19/12 08:27 PM
06/19/12 08:27 PM
|
Joined: Mar 2005
Posts: 862 Iowa State fan
kilroy
super stock
|
super stock
Joined: Mar 2005
Posts: 862
Iowa State fan
|
I m currently running it in my street 440. It will idle between 600-750rpm with good carb tune, lots of lope. I have a single plane and vacuum 2ndarys, It wont roast them from a dead stop with out a lot of rpm, but it will climb as far as you want to take it on the street!
So again, all depends on what your looking for.
1973 Charger, former SE, former auto
I'm not trying to be difficult, it comes naturally....
|
|
|
Re: is this agood cam for street car?
[Re: kilroy]
#1253911
06/19/12 08:32 PM
06/19/12 08:32 PM
|
Joined: Sep 2007
Posts: 14,889 up yours
Supercuda
About to go away
|
About to go away
Joined: Sep 2007
Posts: 14,889
up yours
|
just because a car is driven on the street doesn't mean it is a street car.
Any cam will act milder the bigger the engine it is in. More compression helps. Deeper gears help. Stick is easier than an auto. More stall helps. lighter weight helps. ALL of those move it farther from street till you get to "not a street car".
Since you neglected to mention any details about the vehicle, engine, trans, gears etc you cannot expect an answer that is relevant.
They say there are no such thing as a stupid question. They say there is always the exception that proves the rule. Don't be the exception.
|
|
|
Re: is this agood cam for street car?
[Re: radar]
#1253912
06/19/12 09:22 PM
06/19/12 09:22 PM
|
Joined: Feb 2005
Posts: 4,316 Prospect, PA
BSB67
master
|
master
Joined: Feb 2005
Posts: 4,316
Prospect, PA
|
Quote:
......it quit pulling before 6000 rpm.
That does not seem right
|
|
|
Re: is this agood cam for street car?
[Re: CUDA8U]
#1253917
06/20/12 12:45 AM
06/20/12 12:45 AM
|
Joined: Apr 2006
Posts: 4,220 West Plains, MO
DrCharles
master
|
master
Joined: Apr 2006
Posts: 4,220
West Plains, MO
|
Quote:
gears 3:55 stall 2800
Nope, that's too much cam for those gears and converter
|
|
|
Re: is this agood cam for street car?
[Re: CUDA8U]
#1253919
06/20/12 01:24 AM
06/20/12 01:24 AM
|
Joined: Feb 2007
Posts: 5,080 organ
maximum entropy
master
|
master
Joined: Feb 2007
Posts: 5,080
organ
|
too small in my 496. how big are you? big engine, go big. that cam in an 8:1 340 would be a turd on the street.
for what is the good life if not doing things thoughtfully?
|
|
|
Re: is this agood cam for street car?
[Re: CUDA8U]
#1253921
06/20/12 08:16 AM
06/20/12 08:16 AM
|
Joined: Jan 2003
Posts: 24,562 Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
well thanks guys,I realize it's an open ended question with all my specs etc
gears 3:55 stall 2800 manual steering/brakes but may ad power steering 10-1 comp
i just stumbled upon this cam in a local ad and thought I'de ask
thanks again
No it's not a street cam, unless your idea is driving it to the track and racing it and second it will not work well w/ what you have. If i were you I'd look in the 480-490ish range and something around 220 @ .050
|
|
|
Re: is this agood cam for street car?
[Re: Dunnuck Racing]
#1253924
06/20/12 06:39 PM
06/20/12 06:39 PM
|
Joined: Nov 2006
Posts: 2,255 IL
furious70
top fuel
|
top fuel
Joined: Nov 2006
Posts: 2,255
IL
|
I'm surprised that no one has suggested you bump down 1 to the 528, I would think you'd be happier with that based on the rest of your combo?
70 Sport Fury 68 Charger 69 Coronet 72 RR
|
|
|
Re: is this agood cam for street car?
[Re: DrCharles]
#1253929
07/08/12 01:16 PM
07/08/12 01:16 PM
|
Joined: Feb 2003
Posts: 21,318 Manitoba, Canada
DaytonaTurbo
Too Many Posts
|
Too Many Posts
Joined: Feb 2003
Posts: 21,318
Manitoba, Canada
|
Quote:
Quote:
gears 3:55 stall 2800
Nope, that's too much cam for those gears and converter
4.10+ gears and a 3500 converter and I'd say go for it.
Quote:
I'm surprised that no one has suggested you bump down 1 to the 528, I would think you'd be happier with that based on the rest of your combo?
The mp .528 would be a real good cam for his combo IMO. However if the OP does not have adjustable rockers and pushrods for a solid cam, I would suggest just going with a lunati voodoo 60303. I ran that cam no problem with stock hydraulic rockers and pushrods.
|
|
|
|
|