who is runing 3.5 bullet race mufflers on the street??? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech who is runing 3.5 bullet race mufflers on the street???

Print Thread

who is runing 3.5 bullet race mufflers on the street??? #1243481 06/01/12 11:01 AM 06/01/12 11:01 AM
Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard... mopar65 OP master
mopar65 OP master Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard...	well seeing how it looks like i wont get to race my dart this year.dont have the money to put in new floors and a cage. I am tired of looking at the car just sit there, So i am going to put some mufflers on the dart and drive it on the street. With that said was thinking about getting some dyno max race 3.5 inch bullets. the exhaust will stop at the rear axle and will add some turn downs.I know it will be loud and there are better mufflers out there. I just dont want every cop in the state coming after me.lol oh and did i say i was broke.lol allready have some 3.5 inch mandrel bent pipe coming for it.Thanks Mopar65 3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: mopar65] #1243482 06/01/12 11:19 AM 06/01/12 11:19 AM
Joined: Jan 2003 Posts: 13,382 Marion, South Carolina [><] an8sec70cuda I Live Here
an8sec70cuda I Live Here Joined: Jan 2003 Posts: 13,382 Marion, South Carolina [><]	I've driven mine w/ 4" bullets on it and never been bothered by cops, but I take it easy around town. They are loud so it will kinda depend on the cop. CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: an8sec70cuda] #1243483 06/01/12 12:55 PM 06/01/12 12:55 PM
Joined: Nov 2009 Posts: 3,082 St. Paul , Mn. tubtar master
tubtar master Joined: Nov 2009 Posts: 3,082 St. Paul , Mn.	Quote: I've driven mine w/ 4" bullets on it and never been bothered by cops, but I take it easy around town. They are loud so it will kinda depend on the cop. That is what it comes down to. I have ran open headers on the street......with slicks screwed to the rims. But I putted around and didn't do anything crazy in front of them. If you unleash the thunder and he hears you from two blocks away , someone is gonna get a ticket. And it might not even be you , but someone is gonna pay. If it is an event......we have a couple cruise type deals every year up here , you have to exhibit extreme stupidity to get tagged.

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: tubtar] #1243484 06/01/12 01:17 PM 06/01/12 01:17 PM
Joined: Jan 2003 Posts: 3,874 Smyrna, South Carolina STEFF master
STEFF master Joined: Jan 2003 Posts: 3,874 Smyrna, South Carolina	I do. No issues....

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: tubtar] #1243485 06/01/12 01:22 PM 06/01/12 01:22 PM
Joined: Oct 2007 Posts: 3,978 Hilltown Pa 1967dartgt master
1967dartgt master Joined: Oct 2007 Posts: 3,978 Hilltown Pa	A little town by me (New Hope, Pa) use decibel meters, and have handed me a ticket for being to loud. Its right on the river and has quite a few bars and is a weekend hang out town. I was just crusining through town with my other buddy big block dart and we got asked to pull over and they got out meters and made us rev the motors. I had 3 in two chamber flows and he had dynomax 3 in bullets, we both got tickets. So it really depends on the cop. I currently run edelbrock victor ss mufflers in 3.5 and don't have any issues but don't go into New Hope anymore. Brett Miller W9 cnc'd heads STR Chassis fabraction

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: 1967dartgt] #1243486 06/01/12 01:36 PM 06/01/12 01:36 PM
Joined: May 2011 Posts: 4,489 northern,Ohio,USA C Clanton master
Clanton master C Joined: May 2011 Posts: 4,489 northern,Ohio,USA	Quote: A little town by me (New Hope, Pa) use decibel meters, and have handed me a ticket for being to loud. Its right on the river and has quite a few bars and is a weekend hang out town. I was just crusining through town with my other buddy big block dart and we got asked to pull over and they got out meters and made us rev the motors. I had 3 in two chamber flows and he had dynomax 3 in bullets, we both got tickets. So it really depends on the cop. I currently run edelbrock victor ss mufflers in 3.5 and don't have any issues but don't go into New Hope anymore. what was the Db level and range/scale? GOTBOOST!New improved with Victor heads. http://www.enginelabs.com/mopar-big-bloc...t-of-necessity/

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: Clanton] #1243487 06/01/12 03:08 PM 06/01/12 03:08 PM
Joined: Mar 2009 Posts: 1,058 bigfork mn D dragram440 super stock
dragram440 super stock D Joined: Mar 2009 Posts: 1,058 bigfork mn	I have 3" bullits and I drive it a little on the street. The 12.5 to 1 comp and 5000 converter dont help making it quiet. 67' charger 499 RB 10.57 at 127

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: dragram440] #1243488 06/01/12 03:31 PM 06/01/12 03:31 PM
Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard... mopar65 OP master
mopar65 OP master Joined: Jan 2004 Posts: 3,838 Central Missouri Fort Leonard...	Quote: I have 3" bullits and I drive it a little on the street. The 12.5 to 1 comp and 5000 converter dont help making it quiet. thanks for the info guys. I dont plan on runing it full throttle through town was just hoping to see if anu body elese was runing them. also mine is a 11.1.1 440 with a 634 lift roller cam/ 4.30 gears and M/T 275/60/15 street slicks. i dont plan on driving the car every day just once and awhile. Mopar65 3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: mopar65] #1243489 06/01/12 03:53 PM 06/01/12 03:53 PM
Joined: Aug 2007 Posts: 1,564 St. Clair Shores, Michigan bigsbigelow pro stock
bigsbigelow pro stock Joined: Aug 2007 Posts: 1,564 St. Clair Shores, Michigan	I think you will be ok with the bullets. There are a lot of guys that run around my neck of the woods with open cut outs. The local police are pretty tolerant of old cars, though. Ryan "Bigs" '73 Duster (BLKDUST) - Black, 100% factory sheet metal, flat hood, 346 cid, J Heads, and a bench seat. http://s268.photobucket.com/albums/jj1/bigsbigelow/ Best to date: 12.40 @ 109 mph

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: mopar65] #1243490 06/01/12 04:31 PM 06/01/12 04:31 PM
Joined: Feb 2007 Posts: 6,295 U.S. M moparniac master
moparniac master M Joined: Feb 2007 Posts: 6,295 U.S.	I am! and it's loud. Mopar Performance

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: moparniac] #1243491 06/01/12 06:01 PM 06/01/12 06:01 PM
Joined: Jan 2003 Posts: 11,724 Portage,michigan B B3422W5 I Live Here
B3422W5 I Live Here B Joined: Jan 2003 Posts: 11,724 Portage,michigan	I drove my old Duster around with 3.5 dynomax bullets on it. Not terribly loud IF you keep your foot COMPLETELY out of it. Never got hassled, but i tried to be a saint if i even smelled a cop anywhere close by Btw, those bullets sound absolutely killer in the water box Last edited by B3422W5; 06/01/12 06:02 PM. 69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight 418 BPE factory replacement headed stroker, 565 lift solid cam Best so far, low 10.30’s 1/4 1.41 best 60 foot 6.56 at 104.17

Re: who is runing 3.5 bullet race mufflers on the street??? [Re: B3422W5] #1243492 06/01/12 08:48 PM 06/01/12 08:48 PM
A Anonymous Unregistered
Anonymous Unregistered A	Do any of you guys have a sound clip with the bullets on?

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1