A833 Tansmission - Bell Housing Bolts - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer A833 Tansmission - Bell Housing Bolts

Print Thread

A833 Tansmission - Bell Housing Bolts #1225369 05/01/12 10:17 AM 05/01/12 10:17 AM
Joined: Jan 2012 Posts: 91 Upstate NY 4 454Baja OP member
454Baja OP member 4 Joined: Jan 2012 Posts: 91 Upstate NY	Does the transmission use four threaded holes on the bell housing to bolt up? The right hand bottom corner on my bell has a thru hole (no threads) and a bolts with nut was used. The problem is the cover hits this nut / bolt and will not bolt on. If threaded is needed I will need to heli coil, just need to know what is correct mounting. thanks

Re: A833 Tansmission - Bell Housing Bolts [Re: 454Baja] #1225370 05/01/12 10:20 AM 05/01/12 10:20 AM
Joined: Dec 2004 Posts: 2,368 Wheatfield, NY Cuda340 top fuel
Cuda340 top fuel Joined: Dec 2004 Posts: 2,368 Wheatfield, NY	Yes, four bolts. The hole must have been stripped out and drilled.

Re: A833 Tansmission - Bell Housing Bolts [Re: Cuda340] #1225371 05/01/12 10:36 AM 05/01/12 10:36 AM
Joined: Jan 2012 Posts: 91 Upstate NY 4 454Baja OP member
454Baja OP member 4 Joined: Jan 2012 Posts: 91 Upstate NY	thanks thats what i tought You are down the road, I live in Rochester with family in lockport and pendleton

Re: A833 Tansmission - Bell Housing Bolts [Re: 454Baja] #1225372 05/01/12 11:47 AM 05/01/12 11:47 AM
Joined: Jul 2010 Posts: 184 Vernon Ct. B bp27 member
bp27 member B Joined: Jul 2010 Posts: 184 Vernon Ct.	I used 7/16-14 .870 long time sert when I did my bell housing.

Re: A833 Tansmission - Bell Housing Bolts [Re: 454Baja] #1225373 05/01/12 04:51 PM 05/01/12 04:51 PM
Joined: Dec 2004 Posts: 2,368 Wheatfield, NY Cuda340 top fuel
Cuda340 top fuel Joined: Dec 2004 Posts: 2,368 Wheatfield, NY	Quote: thanks thats what i tought You are down the road, I live in Rochester with family in lockport and pendleton Yeah, I am not too far away. There are a bunch of members from the Western NY area. I can hit a baseball to pendleton and about 8 minutes away from lockport...

Re: A833 Tansmission - Bell Housing Bolts [Re: bp27] #1225374 05/01/12 05:50 PM 05/01/12 05:50 PM
Joined: Nov 2005 Posts: 15,118 85086 moparpollack Lil Herman
moparpollack Lil Herman Joined: Nov 2005 Posts: 15,118 85086	Quote: I used 7/16-14 .870 long time sert when I did my bell housing. Make sure the bolts are grade 8. DAMHIK 56 Plaza 63 D100 step side 67 Coronet, 68 Roadrunner, 69 Super Bees, 69 Coronet 500 convertible, 70 Roadrunner Post, 79 D150 360, and a severe case of Mopar a,d,d

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1