Exhaust cutout install

Print Thread

Exhaust cutout install #1219866 04/21/12 05:46 PM 04/21/12 05:46 PM
Joined: Jan 2003 Posts: 670 Third rock from the sun. B busboy OP mopar
busboy OP mopar B Joined: Jan 2003 Posts: 670 Third rock from the sun.	I'm putting in a set of the QTP exhaust cutouts. The wiring harness from the motor to the one half of the twist lock connector is quite short. I thought I could position the connector inside the car but it doesn't look like it. I've not done one of these before, but any problem with the connector hanging in the breeze outside the car? It looks like it wouldn't really be "hanging" too low and it seems to be a pretty sturdy twist lock piece. Any help much appreciated. Oh yeah, it's a hybrid.....it burns gas and tires!

Re: Exhaust cutout install [Re: busboy] #1219867 04/21/12 06:52 PM 04/21/12 06:52 PM
Joined: Feb 2003 Posts: 21,318 Manitoba, Canada DaytonaTurbo Too Many Posts
DaytonaTurbo Too Many Posts Joined: Feb 2003 Posts: 21,318 Manitoba, Canada	I would just put it in and zip tie the wires out of the way.

Hop To