LA rockers - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer LA rockers

Print Thread

LA rockers #1215863 04/14/12 10:56 PM 04/14/12 10:56 PM
Joined: Sep 2006 Posts: 1,139 West Tennessee R rbstroker OP super stock
rbstroker OP super stock R Joined: Sep 2006 Posts: 1,139 West Tennessee	I understand that the stock stamped steel rocker arms used on hydraulic cammed LA engines very seldom are actually a 1.5:1 ratio. Does anybody make a stock type stamped steel rocker that is a true 1.5 or even 1.6?

Re: LA rockers [Re: rbstroker] #1215864 04/15/12 12:40 AM 04/15/12 12:40 AM
Joined: Jan 2003 Posts: 5,894 Florida Locomotion master
Locomotion master Joined: Jan 2003 Posts: 5,894 Florida	Never heard of any correct or higher ratio stamped rockers for Mopar. A little ratio is also lost through the different angles in the lifter/pushrod/rocker geometry.

Re: LA rockers [Re: Locomotion] #1215865 04/15/12 09:02 AM 04/15/12 09:02 AM
Joined: Jan 2003 Posts: 25,200 Upper Midwest M MoparforLife Too Many Posts
MoparforLife Too Many Posts M Joined: Jan 2003 Posts: 25,200 Upper Midwest	This is a quote out of one of the Mopar magazines from a while back. Yes it is true what was said above about loosing ratio in the angles of the push rod. The amount of change is surprising.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1