LA rockers

I understand that the stock stamped steel rocker arms used on hydraulic cammed LA engines very seldom are actually a 1.5:1 ratio. Does anybody make a stock type stamped steel rocker that is a true 1.5 or even 1.6?

Never heard of any correct or higher ratio stamped rockers for Mopar. A little ratio is also lost through the different angles in the lifter/pushrod/rocker geometry.

This is a quote out of one of the Mopar magazines from a while back. Yes it is true what was said above about loosing ratio in the angles of the push rod. The amount of change is surprising.