Alternator bracket question - '69 roadrunner w/AC - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Alternator bracket question - '69 roadrunner w/AC

Print Thread

Alternator bracket question - '69 roadrunner w/AC #1210380 04/05/12 03:53 AM 04/05/12 03:53 AM
Joined: Feb 2003 Posts: 1,228 Maple Valley, WA 70mopes OP pro stock
70mopes OP pro stock Joined: Feb 2003 Posts: 1,228 Maple Valley, WA	Is this bracket correct for 1969 roadrunner with A/C? I was looking at the assy drawings for this and it shows a bracket that looks like this but it also says "B-Body Similar". I have what are supposed to be correct length belts (measured them @ 60 inches)however they are to long for my setup. Everything is correct otherwise including compressor clutch. Do B-body cars use a different bracket that allows for more adjust travel? 7152112-IMG_3727.jpg (85 downloads)

Re: Alternator bracket question - '69 roadrunner w/AC [Re: 70mopes] #1210381 04/05/12 03:59 AM 04/05/12 03:59 AM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Looks right to me... "The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."

Re: Alternator bracket question - '69 roadrunner w/AC [Re: 1_WILD_RT] #1210382 04/05/12 09:07 AM 04/05/12 09:07 AM
Joined: Jun 2003 Posts: 21,442 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,442 It's a dry heat	Here is a 1969 Charger setup to compare to 7152216-2.07.02.JPG (128 downloads)

Re: Alternator bracket question - '69 roadrunner w/AC [Re: gtx6970] #1210383 04/05/12 11:46 AM 04/05/12 11:46 AM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Than what the heck does he have... I figured with the leg going back to the engine mount it was correct but obviously I was wrong... "The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."

Re: Alternator bracket question - '69 roadrunner w/AC [Re: gtx6970] #1210384 04/05/12 12:48 PM 04/05/12 12:48 PM
Joined: Nov 2010 Posts: 582 PA B BTTG mopar
BTTG mopar B Joined: Nov 2010 Posts: 582 PA	same as my 69 R/T

Re: Alternator bracket question - '69 roadrunner w/AC [Re: BTTG] #1210385 04/05/12 05:23 PM 04/05/12 05:23 PM
Joined: Feb 2003 Posts: 1,228 Maple Valley, WA 70mopes OP pro stock
70mopes OP pro stock Joined: Feb 2003 Posts: 1,228 Maple Valley, WA	That would be the one I need. Anyone have one? The search is on. Thanks.

Re: Alternator bracket question - '69 roadrunner w/AC [Re: 1_WILD_RT] #1210386 04/05/12 08:47 PM 04/05/12 08:47 PM
Joined: Jan 2003 Posts: 3,967 S.I. N.Y. 1MYTGTX master
1MYTGTX master Joined: Jan 2003 Posts: 3,967 S.I. N.Y.	Quote: Than what the heck does he have... I figured with the leg going back to the engine mount it was correct but obviously I was wrong... You arent wrong....the pic that Bill posted has the same leg as well... Mine does too.... 7153028-11-10-200911-25-32AM_0002_resize.JPG (50 downloads) 1MYTGTX

Re: Alternator bracket question - '69 roadrunner w/AC [Re: 1_WILD_RT] #1210387 04/05/12 08:57 PM 04/05/12 08:57 PM
Joined: Jan 2003 Posts: 75,043 U.S.S.A. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 75,043 U.S.S.A.	Quote: Than what the heck does he have... I figured with the leg going back to the engine mount it was correct but obviously I was wrong... if you look at the picture Bill posted the one he has is shorter than it should be . He could get away with using shorter belts . I think I have that bracket in a pile of A/C junk in the basement .

Re: Alternator bracket question - '69 roadrunner w/AC [Re: JohnRR] #1210388 04/05/12 09:49 PM 04/05/12 09:49 PM
Joined: Feb 2003 Posts: 1,228 Maple Valley, WA 70mopes OP pro stock
70mopes OP pro stock Joined: Feb 2003 Posts: 1,228 Maple Valley, WA	Hey John.. could you check it out for me? They are definitely two distinctly different pieces. I have the correct belts already and would like to use them... not to mention the right part. I am trying to get this rig spot on.

Re: Alternator bracket question - '69 roadrunner w/AC [Re: 70mopes] #1210389 04/05/12 10:50 PM 04/05/12 10:50 PM
Joined: Jan 2003 Posts: 17,517 Las Vegas, NV 6bblgt I Live Here
6bblgt I Live Here Joined: Jan 2003 Posts: 17,517 Las Vegas, NV	I have a bunch of A/C parts I've been collecting to put air back on my '70 383 Challenger R/T. Are the parts the same as shown ('70 vs. '69 )? Is there a difference 383 vs. 440?

Re: Alternator bracket question - '69 roadrunner w/AC [Re: 6bblgt] #1210390 04/05/12 11:21 PM 04/05/12 11:21 PM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	69-71 are the same 383 uses a adapter bolted to the passenger head to relocate the bolt hole up to where a 440's taller deck would locate the hole.... So adapter & the rear alternator spacer is shorter to compensate for the thickness of the adapter... The compressor stabilizer tube brackets are different due to deck height also the A/C compressor rear mount is different to compensate for the deck height.. Stuff on the front of the engine is the same... "The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."

Re: Alternator bracket question - '69 roadrunner w/AC [Re: 1MYTGTX] #1210391 04/06/12 08:49 AM 04/06/12 08:49 AM
Joined: Jun 2003 Posts: 21,442 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,442 It's a dry heat	Every single piece of this is off of a 1969 charger 383 car so I had to find the 440 rear compressor brackets. Ft bracket is the same be it 383 or 440 Like mentioned,, all of it is the same EXCEPT the aforementioned adapter bracket that bolts to the pass side head. And the 3 rear brackets on the backside of the compressor are all unique to there respective application be it 383 versus 440 7153541-2.09.18.JPG (42 downloads)

Re: Alternator bracket question - '69 roadrunner w/AC [Re: gtx6970] #1210392 04/06/12 08:50 AM 04/06/12 08:50 AM
Joined: Jun 2003 Posts: 21,442 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,442 It's a dry heat	lower bracket 7153543-2.09.25.JPG (52 downloads)

Re: Alternator bracket question - '69 roadrunner w/AC [Re: gtx6970] #1210393 04/06/12 08:52 AM 04/06/12 08:52 AM
Joined: Jun 2003 Posts: 21,442 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,442 It's a dry heat	Keep in mind, the idler bracket spacer is unique to 1969 and later in 1967 and 1968 the 2 tubes are equal length 7153545-2.07.10.JPG (53 downloads)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1